OEM led upgrade question

[rj74]

Snagged a set of OEM LED headlights for $200 today. They came off of a 2022, they will be going in my 21 Rubicon. My brother mentioned I may need the jumper harness to make the halos work. Has anyone done the upgrade on a 21 or newer and know if this is true. I don't really care if they have the halos or not and I already have the programmer and will do that once I get them installed tomorrow night.

Sponsored

 

[Jefe1018]

You’ll need oem part 68347117AB to get the halls to work.

 

[rj74]

You’ll need oem part 68347117AB to get the halls to work.

if i"m not worried about the halos then they should be good to go correct?

 

[Jefe1018]

if i"m not worried about the halos then they should be good to go correct?

Yeah, you might need to adjust the ecm via jscan or a tazer but it should be pretty straight forward. Thankfully Jeep headlights are some of easiest to install.

 

[KoBear]

I just wanna know where you found oem LEDs for $200! Lol

 

[rj74]

I just wanna know where you found oem LEDs for $200! Lol

FB Market place, got lucky.

 

[ecidiego]

21 and newer gas = NOTHING needed for Halo.
21 and newer diesel = short jumper needed on passenger side for Halo.

ONLY THE 2020's need the 'halo harness' wired to the BCM in the passenger kick panel.

All models need BCM told about the LEDs. Tazer, jscan, alfaobd etc

Anyone who says otherwise is wrong.

Edit Sep 27: people are reading this thread and applying my comments to aftermarket LED swaps. This thread is about OEM LEDs and my comments apply ONLY TO THOSE.

 

[DailyMoparGuy]

21 and newer gas = NOTHING needed for Halo.
21 and newer diesel = short jumper needed on passenger side for Halo.

ONLY THE 2020's need the 'halo harness' wired to the BCM in the passenger kick panel.

All models need BCM told about the LEDs. Tazer, jscan, alfaobd etc

Anyone who says otherwise is wrong.

I’m having this issue right now myself. I have a 2021 Sport S that came stock with the halogen headlights and fender DRLs. I swapped the headlight for one that has an LED switchback halo for the DRL/turn signals. The turn signals are working fine. The halo DRLs are not and only stay on with the ignition in RUN and engine OFF.

I’ll have to take another look at the BCM options in Jscan tomorrow.

 

[bilib54]

21 and newer gas = NOTHING needed for Halo.
21 and newer diesel = short jumper needed on passenger side for Halo.

ONLY THE 2020's need the 'halo harness' wired to the BCM in the passenger kick panel.

All models need BCM told about the LEDs. Tazer, jscan, alfaobd etc

Anyone who says otherwise is wrong.

I put LED headlight and reversing bulbs in my 2022 last week. No issues, but i guess i'm wrong.

 

[bilib54]

I’m having this issue right now myself. I have a 2021 Sport S that came stock with the halogen headlights and fender DRLs. I swapped the headlight for one that has an LED switchback halo for the DRL/turn signals. The turn signals are working fine. The halo DRLs are not and only stay on with the ignition in RUN and engine OFF.

I’ll have to take another look at the BCM options in Jscan tomorrow.

Looks to me like you'll have to tap in to the parking light circuit for the halos, one of the reasons ($$) I just replaced bulbs.

 

[ecidiego]

I put LED headlight and reversing bulbs in my 2022 last week. No issues, but i guess i'm wrong.

....and......details on what your 2022 is? What it came with? Are you talking about OEM LEDs?

We are talking about OEM Jeep LED ASSEMBLIES with integrated DRL Halo.

Not 'bulbs'.




Jesus....

 

[DailyMoparGuy]

Looks to me like you'll have to tap in to the parking light circuit for the halos, one of the reasons ($$) I just replaced bulbs.

They also they come on when I start the engine, but turn off like 5 seconds later. I can’t figure out why they’re doing that either

 

[ecidiego]

I swapped the headlight for one that has an LED switchback halo for the DRL/turn signals.
I’ll have to take another look at the BCM options in Jscan tomorrow.

So...not an OEM LED headlight? This thread is about OEM LED headlight swaps....the information posted does not relate to any 3rd party products.....

 

[DailyMoparGuy]

So...not an OEM LED headlight? This thread is about OEM LED headlight swaps....the information posted does not relate to any 3rd party products.....

Yea 3rd party. Similar setup though…low beam, high beam, halo DRL all in one housing. The only difference I believe is my aftermarket one has the switchbacks for the turn signal.

 

[Kevin_D]

Yea 3rd party. Similar setup though…low beam, high beam, halo DRL all in one housing. The only difference I believe is my aftermarket one has the switchbacks for the turn signal.

That’s a major difference from the OEM headlights…

Kevin

Sponsored