Pillar Lights-radio interference

[Robert SC]

I added led pillar lights to my 2020 gladiator rubicon. The lights I bought have EMI/EMC anti-interference components but I still have significant static coming thru. The suggestion from customer service was to use https://www.amazon.com/s?k=Clip-on+...terference+RFI+EMI+Noise+Cable&ref=nb_sb_noss on the lights wiring harness. This did not help. Any suggestions? If it matters, I have these lights wired so that aux 4 turns pillar lights on and aux 3 (when turned on) allows the high beams to trigger relay to turn on pillar lights

Sponsored

 

[Darkamek]

Other than getting a different light. You could purchase shielded cable for your power wires and ground the shield on one end.

 

[Robert SC]

The first lights I bought were cheap so I thought buying the lights I have now from auxbeam

1	C4 Series | 4 Inch 100W Round Offroad LED Driving Lights Combo Beam 2Pcs LED Driving Lights+2Pcs Black Covers

would help. I will try the shielded cable.

 

[djthumper]

What radio are you getting interference with?

 

[Robert SC]

oem fm radio signal-8.4 screen

Sponsored