Power mirrors stopped working

[RockDoc]

Spent two weekends ago with doors off and noted the passenger power mirror stopped working. Again had doors off the following weekend and then driver AND passenger power mirrors stopped working. Researched the forum. Checked the fuse - intact. Then learned about the front door wiring harnesses. Good references on bent pins and specifically one that may be powering the mirrors.

https://www.jeepgladiatorforum.com/...-door-electrical-connection.33518/post-577938

On close inspection, 3 pins on driver’s door were slightly bent, but not the one that was noted to be the “mirrors” pin. Aligning the pins did not correct the mirror problem. All other door functions seemingly working correctly. None of the passenger pins were bent. Wiring into the back of the harnesses is not loose.

Any other thoughts on the power mirror failure? Or have I reached “bring to dealer” level.

Sponsored

 

[rhill2901]

Did you figure this out? I'm having the exact same problem on my 2019 wrangler. I checked the fuse, F96, and it reads good. I don't get power on either side of the fuse, which points to either the pdc is defective, the wiring from the pdc to the BCM is broken somewhere or the bcm is defective.

 

[RockDoc]

Nope, just pushed the mirrors to where I like them and hope that no one else in the family doesn't touch them. Whenever I find the time to poke around again, I'll take another stab at it.
If you figure it out, please let me know!

 

[trlwspr]

Having the same issue with my 2020 Gladiator. No pwer to the fuse. When power is supplied to the fuse the mirrors work great. Any reason why the power no longer is being supplied to that particular fuse?

 

[Supazuk]

check the pins in your door harness connector, if they bend they can cause some door functions to malfunction

Sponsored