Shibbyjeep's Trenticus Build

[Sempe-Fi Rubicon]

I bought them from Distiction Applied. They just snap on. Part of their "cover up" line.

thank you so much, headed to their site now.

Sponsored

 

[Shibbyjeep]

Got to SMJI early this morning, 3rd in line at 830, for the Metalcloak CTI trailer. Scored an 850. They said I was sitting on the rear bumpstop and think if I remove a puck then I could score as high as 880. Ill remove and possibly retest at Myrtle Beach Jeep Jam.

 

[Shibbyjeep]

Installed my @Hothead Headliners for sunrider and also added a fire extinguisher to the interior.

 

[Shibbyjeep]

A little catching up here.

A week or two ago after getting the @Metalcloak CTI badge i decided to mount my Jeep BOH badges.

While on the CTI trailer they told me if I removed 1 puck in the rear they believed I would gain another 30 points or so. So I removed those and then last night I installed my MC brake lines that came with my lift bc they also said my lines looked maxed out on the trailer.

While I had the wheels off I found mud(more like cement lol) clogging up all the cooling flutes in my driver's rear rotor. Cleared the mud out and after driving to a localish Jeep show today believe the little shimmy I had in the rear is gone now.

I also finally located a set of Thin Skinz for my truck on the book of faces market place.

Finally I installed one of the Grille stripes from Underground Graphics at SMJI.

 

[Stan H]

A little catching up here.

A week or two ago after getting the @Metalcloak CTI badge i decided to mount my Jeep BOH badges.

While on the CTI trailer they told me if I removed 1 puck in the rear they believed I would gain another 30 points or so. So I removed those and then last night I installed my MC brake lines that came with my lift bc they also said my lines looked maxed out on the trailer.

While I had the wheels off I found mud(more like cement lol) clogging up all the cooling flutes in my driver's rear rotor. Cleared the mud out and after driving to a localish Jeep show today believe the little shimmy I had in the rear is gone now.

I also finally located a set of Thin Skinz for my truck on the book of faces market place.

Finally I installed one of the Grille stripes from Underground Graphics at SMJI.

Dude better clean that mud outta them rotors Holy crapola

 

[Shibbyjeep]

Dude better clean that mud outta them rotors Holy crapola

I did lol

 

[Shibbyjeep]

Won a online auction today for a trailer to serve as the base for my camp trailer.

 

[Stan H]

Won a online auction today for a trailer to serve as the base for my camp trailer.

Thats freaking awesome!!!!!!!!!!!!

 

[Shibbyjeep]

Thats freaking awesome!!!!!!!!!!!!

Its a great start. Hoping to make it awesome!

 

[Stan H]

Its a great start. Hoping to make it awesome!

I want one whats it called looking at the list now

 

[Stan H]

I just did the reg. Now just leafing through. I been looking for something like that for a long time. Didn't know where to go .thanks @Shibbyjeep

 

[Shibbyjeep]

I want one whats it called looking at the list now

M1101 or M1102 trailer. Gov Planet. Next sell is of some in AL on 10/1

 

[Shibbyjeep]

Very very rough first sketch/design of the rack for the camping trailer.

 

[Shibbyjeep]

@Freddy D you can see some of the spots I have hit with my truck in this thread. I reactivated my book of faces to join some groups on there. On my trip to Moab I met a guy thats become a pretty good friend that helps run a group on there that is active in camping and wheeling. Not just mealing over wheeling lol.

 

[Stan H]

@Freddy D you can see some of the spots I have hit with my truck in this thread. I reactivated my book of faces to join some groups on there. On my trip to Moab I met a guy thats become a pretty good friend that helps run a group on there that is active in camping and wheeling. Not just mealing over wheeling lol.

Less miles more meals

Sponsored