Show me your AuxBeam (or similar) FUSE BOX

[Bandit’s Lair]

Where did you put your fuse box for the AuxBeam or similar switch setup? Don’t have it yet but it’s on the Christmas list. Going for the 8 gang slim version so it’s all in line and know where that’s going, but unsure on the fuse panel.

Sponsored

 

[JeepOfTheseus]

 

[CKayaks]

Thanks! This helps me in any case! I plan on moving my Voswitch U120 from the retired Xterra to the new Gladiator. Was hoping it could wedge in there where you have yours. I had to mount it under the dash of the Xterra, which was not convenient. I have a home-made power distribution setup on the other fender to cover circuits I did not need/want on the Voswitch (lithium battery charger, frig, comms, charge line direct to trailer).

 

[813 Fabrication & Design]

I have had several customers us the UnderHood Accessory Plate that I created for the Auxbeam or similar switch box. I designed an A pillar mount to hold the switch plate.

 

[CKayaks]

I have several of Jeremy/813's mounts. I can vouch for his gear! Good quality, fit is excellent, he is quick to get you the parts. I have both the fender mount and the firewall mount for the ARB pump. (Bought the fender one, then decided I needed the space for the Voswitch.) Recently got his fender mount for the switch as well. That will get installed later this month.

 

[Bandit’s Lair]

I have had several customers us the UnderHood Accessory Plate that I created for the Auxbeam or similar switch box. I designed an A pillar mount to hold the switch plate.

That looks super clean!! I like it. I figure that’s about where mine will go as well. Any idea if anyone has installed this plate with the Genesis dual battery setup? I’m “trying” to plan ahead as far as where the rig will be in 5 years so I’m not uninstalling stuff that I actually like to get the functionality. I’ll be looking up your site to see how to get that mount in any case.

 

[813 Fabrication & Design]

That looks super clean!! I like it. I figure that’s about where mine will go as well. Any idea if anyone has installed this plate with the Genesis dual battery setup? I’m “trying” to plan ahead as far as where the rig will be in 5 years so I’m not uninstalling stuff that I actually like to get the functionality. I’ll be looking up your site to see how to get that mount in any case.

Unfortunately it does not work with the Genesis system. I have the dual batteries in my JT. It is too tall for a plate to work. Once I made the plate to get above the batteries there was little room to add anything to the plate. I designed the driver side plate for this reason. I have both plates mounted in my Wife’s JLU.

 

[Bandit’s Lair]

That makes sense and I suspected that may be the case. Might be looking into the drivers side and the passenger side for adding stuff eventually. Thanks.

 

[813 Fabrication & Design]

That makes sense and I suspected that may be the case. Might be looking into the drivers side and the passenger side for adding stuff eventually. Thanks.

Let me know if I can help!

Sponsored