SHOW ME YOUR WHEELS!

[FloridaJT6MT]

Fuel Unit 785s 17x9 +1mm offset
Finally got them in the mud and sand today

Sponsored

 

[Studio Cope]

Fifteen52 Turbomac hd on Toyo Open Country R/T 17 37 x 13.5

 

[Phishs]

Rancho LEvel it kit, Quadratec Baja Xtreme wheels with 255/80-17 Falken At's:

Are these the gun metal ones?

 

[Snzzbry_Ovrlnd]

Hey that's a pretty cool aftermarket water tower mounted in your second pic. Ain't she a little top heavy that way?

Lol

 

[The Beav]

New Shoes :D the old shoes were fine just not great!

 

[FloridaJT6MT]

New Shoes :D the old shoes were fine just not great!

Looks great. What size wheel/tires? You running a lift?

 

[jjdustr340]

Polished wheels are nice, but there ain't much out there. I keep looking. I don't want poke and I'd like to stick with 18s on the Overland. I love the ARE Bajas I had on a YJ, but it doesn't look like they have a size I'd be happy with. I had AEV Pintlers on my LJ; no 18s. looked pretty, but any semi-serious rock crawling has a tendency to shear off the ends of valve stems. Looking at maybe AREs Outlaw II. 8" wide, 5.21" backspace, 18mm offset, I would think them to work well with a small lift and Ridge Grapplers.

Since you mentioned 18s, here’s what I have. 18x9 Vision Se7ens with +12 offset. Tires are 295/70R18 (34x11.5) Falken Wildpeak AT3W. Little bit of poke but not a lot.

 

[The Beav]

Looks great. What size wheel/tires? You running a lift?

35x12.5x17 Yokohama x-at’s on 17x9 -12 using rubicon takeoff springs and shocks for $300 then Tera flex 1.5 spacer in front and .75 daystar in rear, the overland ride was more squishy the rubi springs firmed it up which I like more

 

[unsocbl]

Are these the gun metal ones?

Yes they are. Currently on my new Mojave:

 

[Fouts]

AEV Salta, installed today.

 

[rtjeepman]

Fuel Beast 17x9.

 

[jl_explorer]

Thanks @DocMike ! I do have the Clayton 2.5" and it is exactly right for what I'm looking for in terms of ride height and balance of 37" tires.

Method 701 wheels, 0 offset with 37x12.5x17" Patagonia MTs. Very pleased with the setup. Will see how it trailers next summer in terms of wear but these have been good performers so far.

Do you have the 3/4 inch rear spacers installed in this pictures? Love this setup (so much so it's the one I'm installing next week).

 

[FR33DOM]

Do you have the 3/4 inch rear spacers installed in this pictures? Love this setup (so much so it's the one I'm installing next week).

Yes that is correct. I kept the 3/4" rear spacers to offset the cap load and keep the rake.

 

[wv_gladiator]

Recon wheels

 

[SargeDiesel]

View attachment 53779

do you remember the backspacing on the centerlines ? They look great ! I will be adding 17x8.5 -18 with 4" backspacing(which should not poke out but 6mm more than yours) hopefully this setup will not rub, even doing some tough trail/offroading.. due to the back spacing.

Sponsored