Stock Rubicon on 35's hitch height

[CJ-ING-RJ]

As the title says I need a measurement. I'm looking for a stock 2020 Rubicon on 35's. No life, not sport, no max tow. Bone stock on 35's. As the say the more you play with it the bigger it gets. Well I'm going the opposite direction. Mine keeps getting smaller. So I need that measurement. From the level concrete to the lowest point on the hitch. Thanks all..
Ps.... yes I know miles, age, tire brand, etc will change shit but you will get me close.

Sponsored

 

[Chilli]

Is it your understanding that the Max Tow is changing something on the stock Rubicon ?

 

[CJ-ING-RJ]

Is it your understanding that the Max Tow is changing something on the stock Rubicon ?

Yes very much. The Max tow has Dana 44's, the wide track, 4:10 gears etc. But it does not have the same suspension, lockers, same transfer case. Etc. So the stock weight and suspension will give it a different ride height. I have a Rubicon so that s why I want a Rubicon measurement. I know I could have been s art and measured before I added shit. But I didn't.

 

[Jonny A]

35 x 12.5 x 17 BFG KO2 T/A, 40 psi, 18 3/8" to lowest part on hitch. Stock height JTR. No winch or weight in bed other than 3 pc hard tonneau. Steel front and rear bumpers with bull bar on front.

 

[CJ-ING-RJ]

35 x 12.5 x 17 BFG KO2 T/A, 40 psi, 18 3/8" to lowest part on hitch. Stock height JTR. No winch or weight in bed other than 3 pc hard tonneau. Steel front and rear bumpers with bull bar on front.

Perfect........ Thanks!!!

 

[blau iii]

Sorry to highjack this thread but same question but to the top of the hardtop roof? I have a JTR on order and plan to put 35's with the stock suspension. I'm now worried about it fitting in the garage door opening..

 

[stingrey]

Sorry to highjack this thread but same question but to the top of the hardtop roof? I have a JTR on order and plan to put 35's with the stock suspension. I'm now worried about it fitting in the garage door opening..

I would take the roof measurement from the Official Measurements Thread (73") and add ~ 1". Should get you pretty close.
https://www.jeepgladiatorforum.com/forum/threads/official-gladiator-measurements-thread.17903/

 

[blau iii]

I would take the roof measurement from the Official Measurements Thread (73") and add ~ 1". Should get you pretty close.
https://www.jeepgladiatorforum.com/forum/threads/official-gladiator-measurements-thread.17903/

Awesome! Thanks.

Sponsored