Teraflex 1.5” Leveling Kit on 2020 Gladiator Rubicon Launch Addition

[Rich Man Poor Man]

Sanity check please! First upgrades after 55k miles. Falken 33’s need replaced in 5k miles.
70% on pavement, 30% BLM Overlanding. No serious rock crawling.
My plan:
35” BFG AT T/A KO2-approx same weight as my 33” Falken. Have not seen any bad reviews on BFG.
Teraflex 1.5” leveling kit. May only go 1” as I tow a variety of toys and load the back with gear. I have the Fox upgraded shocks that came standard with the Gladiator launch addition.
Will the 1” front lift give me the room I need for the 35’s or should I go with 1.5”? Do not plan on replacing shocks or additional suspension parts, good move?
Also adding Mopar single hoop guard, snorkel, cold air in-take, 5” and 7” LED’s, tube doors. Also adding Injen single exit high tuck exhaust. Would appreciate thoughts on additional equipment. Been chomping at the bit to start building out! Thanks in advance for your review and thoughts.

Sponsored

 

[JTBurns]

A lot of people say you don't even need it to fit 35's on a rubi. I have a sport with a rubi suspension and plan on using the 1" on top of that for 35's but you have higher fenders. Again most likely don't need it, but 1" should be more than enough

 

[Rich Man Poor Man]

Thank you! I am trying to reduce the rake a little. My dealership said I should install a Mopar steering damper for the 35’s???

 

[JTBurns]

Thank you! I am trying to reduce the rake a little. My dealership said I should install a Mopar steering damper for the 35’s???

Wasn't planning on that myself. You may want a new dampener for 35's depending on how heavy. A lot of people add the control arms from the Mopar lift when adding the teraflex level for better caster

Sponsored