Warn 8274

[mtudb24]

Has anybody mounted a Warn 8274 on a gladiator and if so which mount? I have one offered to me and at a good price and wondering if anybody makes a mount to fit it or is it too much of a dinosaur to try and make work

Sponsored

 

[Moriarty]

I mounted a M8274 with a custom mount.

I'll post a couple pics tomorrow.

 

[Moriarty]

Past pic

 

[Moriarty]

Currently with Metal Cloak sides

 

[stil2low]

Had my buddy that built my bumper make a winch plate to accept the 8274

 

[mtudb24]

Currently with Metal Cloak sides

Awesome. Looks great!!!!

 

[mtudb24]

Had my buddy that built my bumper make a winch plate to accept the 8274

Fantastic!! Your buddy did a great job. Would like to have something similar

 

[IanNubbit]

Not mine, but I helped a friend do his last weekend. JK Warn Winch plate on a Hyline bumper. Had to drill holes in the bumper to mount the plate, but works great. Custom 8274 with a 6hp motor. Guess that makes 3 total? lol

View attachment 252624

 

[dvaders]

First test fit of my 8274. The mount is made of welded 1/2" aluminum plate (spaces the bumper out by 1/2" over the stock position. Plenty of clearance between the winch and grill though I did have to rotate one of the controller hose clamps up out of the way.

 

[Moriarty]

First test fit of my 8274. The mount is made of welded 1/2" aluminum plate (spaces the bumper out by 1/2" over the stock position. Plenty of clearance between the winch and grill though I did have to rotate one of the controller hose clamps up out of the way.

Looks good!

 

[mtudb24]

First test fit of my 8274. The mount is made of welded 1/2" aluminum plate (spaces the bumper out by 1/2" over the stock position. Plenty of clearance between the winch and grill though I did have to rotate one of the controller hose clamps up out of the way.

Fan-fusting -tactulator. Well done. Impressive for sure!

 

[Alk44]

Stock bumper, Warn Winch Plate, and a TMR 8274 Mount cut and welded to the Warn Plate. Did require cuttting the stock bumper, but no spacers required.

 

[dvaders]

Stock bumper, Warn Winch Plate, and a TMR 8274 Mount cut and welded to the Warn Plate. Did require cuttting the stock bumper, but no spacers required.

Looks good!

 

[Tech Tim]

Has anybody mounted a Warn 8274 on a gladiator and if so which mount? I have one offered to me and at a good price and wondering if anybody makes a mount to fit it or is it too much of a dinosaur to try and make work

It may be a dinosaur, but it is still one of the best winches ever built. And the aftermarket accessories available for it are awesome, from solid state contactors to bigger motors to dual motors and even air disconnect drums. Unfortunately most of that cool stuff is in Europe and fairly rare here in the USA.

 

[mtudb24]

Stock bumper, Warn Winch Plate, and a TMR 8274 Mount cut and welded to the Warn Plate. Did require cuttting the stock bumper, but no spacers required.

Thats awesome!!!!

I got a bumper, now just to get a winch

Sponsored