What can we do for you?

[Texbaz]

Mopar (68386743AE),Mopar (68433234AC), Mopar (68433233AC)

I believe each of these part numbers can be used but no mention of accustic feature.
I'm going to use my auto insurance probably my recent 2500 mile trip has tapped me out. So I pay a deductible

ShadowsPapa, I've read your adventure with a simple glass r&r sorry for your inconvenience. I'll be sure to try and watch the tech. Definetly going to cover and protect the interior dash area,

Sponsored

 

[Texbaz]

I think Benny has mentioned it before, but they do not ship glass and you will have to order through your local dealer if you want it

The Dallas distribution center allows pickup.

 

[ShadowsPapa]

Mopar (68386743AE),Mopar (68433234AC), Mopar (68433233AC)

I believe each of these part numbers can be used but no mention of accustic feature.
I'm going to use my auto insurance probably my recent 2500 mile trip has tapped me out. So I pay a deductible

ShadowsPapa, I've read your adventure with a simple glass r&r sorry for your inconvenience. I'll be sure to try and watch the tech. Definetly going to cover and protect the interior dash area,

 

[AllMoparParts.com]

Hello Benny,
I have a 2023 Jeep Mojave made 12/23.
I finally demolished / cracked the windshield and it needs replacement.
The OEM that is cracked was actually really good, quiet. So I would like to know are all 6 windshields listed for my Mojave, considered acoustic glass. I know 2 of the 6 are Gorilla and I don't want that. I just want the glass my truck came with from the factory OEM. (No adaptive cruise)
Can you tell me which part number I would order.
Thanks

Hi,
We are not shipping windshields at this time but send me your VIN and I will provide the OE #

Thanks,
- Benny

 

[Texbaz]

Bet it's the same acoustic glass my wife's 23 JLU had - it was built late 2022. No ACC, no antenna in the glass (that's a 24-25+ thing) and not GG.

Thanks ShadowsPapa,
I couldn't find the p/n on my windshield but when I saw your picture I knew why. My inspection sticker was covering it up. That's what got me questioning part number for the replacement glass.

 

[Texbaz]

Hi,
We are not shipping windshields at this time but send me your VIN and I will provide the OE #

Thanks,
- Benny

Hi,
We are not shipping windshields at this time but send me your VIN and I will provide the OE #

Thanks,
- Benny

Thanks Benny.

 

[ShadowsPapa]

Thanks ShadowsPapa,
I couldn't find the p/n on my windshield but when I saw your picture I knew why. My inspection sticker was covering it up. That's what got me questioning part number for the replacement glass.

I put a chunk of paper in there in order to get the numbers to show up.

 

[D_JT]

That's what I've been thinking about.
I may as well order those pieces from Benny (the shorter bumper filler parts for left and right)
I've also been thinking like you - drill, even bend, if needed.

Just to confirm. I got the trim pieces in yesterday. They fit perfect. Almost like Jeep was planning this from the beginning. A 5/16 drill bit is the perfect size. Will anyone notice them? Probably not. Did they add an extra 50HP? I like to think so. Am I happy with them? Yes.

 

[ShadowsPapa]

Just to confirm. I got the trim pieces in yesterday. They fit perfect. Almost like Jeep was planning this from the beginning. A 5/16 drill bit is the perfect size. Will anyone notice them? Probably not. Did they add an extra 50HP? I like to think so. Am I happy with them? Yes.

I think I got my 0-60 times down about 0.003 seconds faster with them, the JT rides smoother, it's quieter and my MPG will surely be a lot better!

I may drill mine a bit larger to accommodate those other fasteners. At this point - "christmas tree" retainers.
With the Badland Apex winch - you have to trim the ends as the winch is so WIDE.

These things are solidly mounted in any case. It would really take something to rip them off of there.

Thanks, Benny!!

 

[AllMoparParts.com]

49-1/2 HP easily but def not 50

 

[LatteSipper]

Sorry, with my Iowa City hosp time on Friday and crazy weekend, almost forgot!!

The good -
The bolts are M6 (course, 1.0 thread) by 30mm
The last 3 mm are the guide nose for factory installation

There is a captured washer.
If you want bone-stock, bet Benny can find the bolts, otherwise I'd go to a good hardware store and buy bolts and nuts.
There are nutserts in the frame, no actual "nuts" involved.

Thank you, appreciate it!

 

[mikeyp03]

Hey Benny,
I’m looking for a paint pen in ‘41 color, can’t seem to find it, assuming it might not be available yet?
I’m also planning to order the dashboard rail and phone mount, any chance you know if more accessories for the dashboard rail will be released?

 

[Jetskier222]

Benny,

I have a 2020 Gladiator Sport that I'm trying to get the tailgate power lock to work on. I added the door locks and got them working. I installed the tailgate lock, and what I thought was the right harness, but I can't get it to lock/unlock. What is the right part number for the harness? Does my body harness have the right wires/pins? I assumed since the pins were there for the door locks, these would be too, but maybe I'm wrong?

 

[ShadowsPapa]

Benny,

I have a 2020 Gladiator Sport that I'm trying to get the tailgate power lock to work on. I added the door locks and got them working. I installed the tailgate lock, and what I thought was the right harness, but I can't get it to lock/unlock. What is the right part number for the harness? Does my body harness have the right wires/pins? I assumed since the pins were there for the door locks, these would be too, but maybe I'm wrong?

You are talking only power locks, not passive entry, right?
It's possible the wires don't go to the back for the power tailgate lock.

 

[Jetskier222]

You are talking only power locks, not passive entry, right?
It's possible the wires don't go to the back for the power tailgate lock.

Yes.

Sponsored