What can we do for you?

[D_JT]

I just placed an order. Do you want to help install mine?

It’s not THAT bad. I did install mine at the same time I did a dash panel swap. The hardest part for me was mounting and bolting the module to the side of the footwell. Not much room to work with. Hopefully you have tiny hands. .

Sponsored

 

[biodiesel]

Not much room to work with. Hopefully you have tiny hands. .

My wife has smaller hands than I do, so that part might be a good job for her.

 

[TexasAg77]

Id prefer to check this via your VIN please

- Benny

I just picked up my JT on Thursday and actually found one of the rare 82215652AD units at a nearby dealer. Mine didn't have it but saw it listed at the place about 30 miles away.

Benny, am PMing you my VIN if you could please verify if I am good to go. If so probably will go to my local dealer, who didn't have what I wanted, for them to install it, if set up for it.

Thanks,

Ed

 

[Cwg33]

Hi,
These part numbers are available to order. I am not sure if something changed as I dont recall looking for these recently. Here are links

https://parts.allmoparparts.com/oem-parts/mopar-rear-fog-lamp-right-68637538aa?c=bD0xJm49U2VhcmNoIFJlc3VsdHM=
https://parts.allmoparparts.com/oem-parts/mopar-rear-fog-lamp-left-68637539aa?c=bD0xJm49U2VhcmNoIFJlc3VsdHM=
https://parts.allmoparparts.com/oem-parts/mopar-rear-bumper-wiring-68349976ac?c=bD0xJm49U2VhcmNoIFJlc3VsdHM=

- Benny

Hey Benny,
Looking at doing this on a 25’ Mojave X, and the rear bumper wiring on your site shows a mismatch for my year. It has 68616366AA as the replacement part. Is that accurate to support the Steel Bumper, Park Sense, & Rear Fog lights? Thank you for any info.

 

[AllMoparParts.com]

Hey Benny,
Looking at doing this on a 25’ Mojave X, and the rear bumper wiring on your site shows a mismatch for my year. It has 68616366AA as the replacement part. Is that accurate to support the Steel Bumper, Park Sense, & Rear Fog lights? Thank you for any info.

Hi,

We would want to use 68616368AA for the wiring

Please let me know if you have any other questions at this time.

Thank you,
- Benny

 

[Cwg33]

Hi,

We would want to use 68616368AA for the wiring

Please let me know if you have any other questions at this time.

Thank you,
- Benny

Great, thank you. Could you please send a code and I will get these ordered.

 

[AllMoparParts.com]

Great, thank you. Could you please send a code and I will get these ordered.

For sure, DM sent!

- Benny

 

[rymac986]

Are the washer fluid hoses that come in the performance wiper kit able to be purchased without buying the whole kit? One of my hoses broke at the connection under the wiper arm.

 

[AllMoparParts.com]

Are the washer fluid hoses that come in the performance wiper kit able to be purchased without buying the whole kit? One of my hoses broke at the connection under the wiper arm.

Hi Ryan,
I do not see them available separately but I think some auto parts store washer hose should work as a replacement.

- Benny

 

[Birdman91]

Benny,

Do you have the part number for the rubber grommets that help hold the real tail lights in? I had a shop replace mine when they were doing some body work, and they lost them.

My vin is: 1C6JJTBG8RL108043

Thanks,

 

[AllMoparParts.com]

Benny,

Do you have the part number for the rubber grommets that help hold the real tail lights in? I had a shop replace mine when they were doing some body work, and they lost them.

My vin is: 1C6JJTBG8RL108043

Thanks,

Yes Greg they can be purchased here
https://parts.allmoparparts.com/oem-parts/mopar-tail-lamp-grommet-6511668aa

Please let me know if you have any other questions at this time.

Thank you,
- Benny

 

[Balor]

Hi Benny. I'm replacing the front bumper on my 2025 Willys with a steel rubicon front bumper, I am adding a winch, and I would also like to add the front skid plate as well and understand there is a kit for the brackets for the skid plate to attach to can you find the kit for me?

Billy

 

[AllMoparParts.com]

Hi Benny. I'm replacing the front bumper on my 2025 Willys with a steel rubicon front bumper, I am adding a winch, and I would also like to add the front skid plate as well and understand there is a kit for the brackets for the skid plate to attach to can you find the kit for me?

Billy

Hi Billy,
Yes this is it https://www.allmoparparts.com/sku/jljtskidplthw.html

Please let me know if you have any other questions at this time.

Thank you,
- Benny

 

[Balor]

Hi Billy,
Yes this is it https://www.allmoparparts.com/sku/jljtskidplthw.html

Please let me know if you have any other questions at this time.

Thank you,
- Benny

Thank you Benny.

 

[tpatterson2411]

Benny
I was looking at 68581151AA on the site but the shipping is crazy any help is appreciated. I need 4
Thanks

Sponsored