What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Mightytalldude]

Ok…so don’t piss on my cheerios…. cuz I like a clean Jeep.

I work from home….the JT is mine. My husband owns a BMW M4 with summer tires. So…when it snows…or the roads are nasty & salty… . my husband drives the JT to work and gets all the fun in the snow.

Izzy got all salted up……

It was 37 degrees & sunny today. He did a quick power wash/foam/rinse - no wipe down. It’s still dirty…and I’m fine with that. It’s only gonna get dirty & salted up again this winter. I hate the cold, so you won’t see me out there doing that.
We don’t necessarily like car washes…… Tried a local touchless wash and that totally sucked!! $9 and the truck was still dirty!!

He’s a keeper and I love him dearly…….

C’mon spring!!!

Especially for the cold, that foam canon you're using works really really well. What's the brand of it, and the soap used, because what I use totally sucks. Thanks.

Sponsored

 

[Janster]

Especially for the cold, that foam canon you're using works really really well. What's the brand of it, and the soap used, because what I use totally sucks. Thanks.

The husband went thru many different canon’s and soaps….So far, this one has been working well with our setup.

MTM Hydro PF22 Foam Canon with 100ml of Adams Mega Foam
We use an Active 2.3 Pressure Washer

 

[Minty JL]

Well since my DV8 door pockets will arrive this week.......I decided it was time for the sagging shitshow to goo bye bye

 

[Bjeepz]

I wiped snow off mine today, that is all.

 

[SaiintNick]

Well since my DV8 door pockets will arrive this week.......I decided it was time for the sagging shitshow to goo bye bye

They are great for dog poop bags and thats the only good reason I can think of.

 

[SaiintNick]

I treated all my plastics/rubber with 303 Protectant.

 

[TopDuck]

I torqued the harp top bolts to spec…. Again.

 

[Rusty PW]

Well since my DV8 door pockets will arrive this week.......I decided it was time for the sagging shitshow to goo bye bye

Tell us how you really feel.

 

[Minty JL]

Tell us how you really feel.

Lol, I think that's my specialty

 

[Master_Cylinder]

Ok…so don’t piss on my cheerios…. cuz I like a clean Jeep.

I work from home….the JT is mine. My husband owns a BMW M4 with summer tires. So…when it snows…or the roads are nasty & salty… . my husband drives the JT to work and gets all the fun in the snow.

Izzy got all salted up……

It was 37 degrees & sunny today. He did a quick power wash/foam/rinse - no wipe down. It’s still dirty…and I’m fine with that. It’s only gonna get dirty & salted up again this winter. I hate the cold, so you won’t see me out there doing that.
We don’t necessarily like car washes…… Tried a local touchless wash and that totally sucked!! $9 and the truck was still dirty!!

He’s a keeper and I love him dearly…….

C’mon spring!!!

When you say that he’s a keeper and you love him, you are talking about the Gladiator, right?

 

[TheTrailGeek]

Got the 40s mounted. They fit better than I expected. Even at +25 offset they clear the control arms, rock rails, bumper, skid plate at ride height and haven't rubbed driving around on the street. Still have the spacers coming and I'm sure trimming will be required to make it all work well off road but so far off to a good start.

What lift and what size lift?

 

[BlueScapegoat]

What lift and what size lift?

40x13.5r17

It's a pieced together lift. The coils are AEV High Capacity 3" diesel coils, plus 1.5" of spacer in the front. Actual total lift is about 4" front 4-1/8" rear loaded in this config.

 

[TopDuck]

What year is the JT? Does your front passenger side have that stupid piece of metal hanging down to “prevent” the tire from pushing in during a front on collision?

 

[BlueScapegoat]

What year is the JT? Does your front passenger side have that stupid piece of metal hanging down to “prevent” the tire from pushing in during a front on collision?

Asking me? It's a '22. It did, but a plasma cutter and flap disc took care of that

 

[TopDuck]

I need to do that. Bent the lower control arm wheelin and ended up shredding a 37 on that stupid thing…

Sponsored