What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[kolbjo]

I downsized from a 2011 F150 with a 6.5' box with a topper, so between the massive back seat I had and all of the room in the bed, I lost a lot of storage space for the junk I usually keep in my truck. I didn't want to shell out the money for a decked system and wanted something I could put in and take out in about 10 minutes, so I made a storage system out of plywood. I don't have a locking system on it now, but it butts up to the tailgate so the drawers won't open with it closed and locked. The only thing holding it in the truck are two turnbuckles up front, but it is pretty heavy loaded, so it isn't going anywhere. The one side folds open and flat in the event I have something bigger that I want to fit under the tonneau cover. On the inside of the box I have a few strips of plastic that the drawers slide on. So far it works pretty well.

Sponsored

 

[Mopar King]

I downsized from a 2011 F150 with a 6.5' box with a topper, so between the massive back seat I had and all of the room in the bed, I lost a lot of storage space for the junk I usually keep in my truck. I didn't want to shell out the money for a decked system and wanted something I could put in and take out in about 10 minutes, so I made a storage system out of plywood. I don't have a locking system on it now, but it butts up to the tailgate so the drawers won't open with it closed and locked. The only thing holding it in the truck are two turnbuckles up front, but it is pretty heavy loaded, so it isn't going anywhere. The one side folds open and flat in the event I have something bigger that I want to fit under the tonneau cover. On the inside of the box I have a few strips of plastic that the drawers slide on. So far it works pretty well.

How many hats do you feel like you need at any given time while your out Jeepn?

 

[kolbjo]

How many hats do you feel like you need at any given time while your out Jeepn?

Haha, I have always kept all of my hats in my truck.

 

[Gren71]

Got in a storage piece another forum member recommended from wish.

WOW

Thing fits perfectly doesn’t even need double sided tape. All i did was add felt to the tray edge on both sides (not pictured) incase a leg touches it. $22 shipped from wish. Worth every penny imo.

 

[SloW8]

Can you tell me where that bit is from? Fits that attachment perfectly, low profile...

Yep, its the one from the factory top and door removal tool kit. The long torx bit for the door stay things also works really well in it.

 

[Jpeazy21]

I pushed her limits today on fuel...

 

[Gren71]

I pushed her limits today on fuel...

this makes me uncomfortable

 

[Deleted member 30519]

Lol

 

[Gavidoc]

Almost done with the blackout work.

changed the Jeep logos for flat black, used some smoked tint on the turn signals and back up lights.
Still debating replacing the grill insets for a set I would paint matte black.

 

[SF_E60]

I pushed her limits today on fuel...

Living dangerously

 

[mx5red]

Yep, its the one from the factory top and door removal tool kit. The long torx bit for the door stay things also works really well in it.

Thanks, should've figured.
I didn't look before yesterday, but can't find my kit - not under seats or glovebox

 

[DougM55]

Installed a Fab Fours front bumper. Heavy duty! Can use it to tow behind RV now. It was a bear to get to the studs to install the nuts due to all the internal bracing.

Winch ready if I ever need one but looks better than most other bumpers I’ve seen without the winch. Fab Fours packing sucked! Lots of little dings and scratches. Kudos to CariD for the price match and appearance allowance gift card for the scratches. I need to get a rattle can to touch it up.

The extra weight of the bumper caused more nose dive and body roll with the stock suspension. Still need to mount my Rigid Radiance cubes in place of the fog lights.

 

[m3lover1]

I pushed her limits today on fuel...

Did that couple times (on my JL). I am programmed to refuse to pump gas before the gas light comes on (unless special reason that I need to), so sometimes I end up running it very low lol

 

[Gregbj33]

More what I did for it than to it, for now. Ordered a set of Rubicon Fender Flares with LED Lighting. Hopefully have within a week.

I’ll have a set of Textured Black Sport S flares available for sale once installed.

 

[Gladiator Joe]

Warn Low profile winch guard installed.

Sponsored