GoolsbyMD77
Active Member
New rear track bar to fit my 37s under the bed.
Sponsored
If you haven't bought it yet I'd suggest the rock krawler triangulated uppers instead. Eliminates the track bar entirely but also fixes the pinion dive you get from the short uppers with long lowers of the factory set up and also Eliminates the cross talk between the front and rear bars virtually eliminating the head toss crossing uneven surfaces. By far the best upgrade I've done to the truck from a handling perspective.New rear track bar to fit my 37s under the bed.
Got ya. I just got update today that mine have shipped. Iāll have to figure out paint next. Either I try it myself or pay to get it done. Iām going to paint the tube sides and underneath textured black and paint match the fender side white.
How are the new tires!This is my list.
1. Ohlins Shocks. 3" to 5" lift.
2, Drive Shaft, Woods.
3. LoD Signature Shorty Bumper.
4. Warn Zeon 12S Platinum Winch.
5. RCV Axles.
6. CroMoly Rear Axles.
7. ARB dual air compressor.
8. Kraken under the seat ARB mount.
9. Next Venture belly skid plate.
10. Front Diff Brace Kit
![]()
The tires are wearing great so far. Have over 5,000 miles on them and they still look like new. Off road they are great. Rain is no problem. Haven't had a chance in the snow yet. They do hum on the highway.How are the new tires!
Is that the pro series? If so, Iād highly recommend the low profile clamps. The included ones are HUGE.Got a SteerSmarts Track Bar coming.
Trying to track down a clicking sound in the front. Fingers crossed this fixes it. If not, I'll move to the Drag Link.
![]()
I also purchased the upgraded clamps.Is that the pro series? If so, Iād highly recommend the low profile clamps. The included ones are HUGE.
I bought mine originally without them, and as soon as I saw how big the normal ones were, ordered the low profile.I also purchased the upgraded clamps.
I bought mine originally without them, and as soon as I saw how big the normal ones were, ordered the low profile.
I have one concern though. I'm afraid it might not clear my aftermarket diff cover. Can you confirm my concern?Is that the pro series? If so, Iād highly recommend the low profile clamps. The included ones are HUGE.
I have the stock cover, but have the huge next venture diff skid. It doesnāt seem to get close to the diff. I think itāll be fine unless itās an inch thick.I have one concern though. I'm afraid it might not clear my aftermarket diff cover. Can you confirm my concern?
We shall see next weekI have the stock cover, but have the huge next venture diff skid. It doesnāt seem to get close to the diff. I think itāll be fine unless itās an inch thick.