What wheel offset do I need for 37’s?

[SoCalJeeper]

I’m about to install 37x12.5x17 tires on a 2023 rubicon with the eco diesel. It has a 2.5 inch lift installed. What should I go with for a wheel offset/backspace so I don’t get any rubbing?

Sponsored

 

[Escape.idiocracy]

0 offset. Will likely want flare extensions and mudflaps. But they tuck/articulate nicely into the fender. Will need minimal bump stops 1/2” front and rear is conservative if you have a tall 37” tire. (Diesel has longer front bump stop jousts than gas…)

 

[SoCalJeeper]

What if I want a little “poke” so there is a little more aggressive stance?

 

[Lunentucker]

What if I want a little “poke” so there is a little more aggressive stance?

Put function ahead of looks

 

[Lunentucker]

And you can run that tire on your stock rims with no issues.
Stock Rubicon is -44mm and 7.5"
Move the offset out 13mm for every inch you add in rim width.
If you go to an 8-1/2" wide, an offset -30 to -25 would be a smart move.

https://tiresize.com/wheel-offset-calculator/

 

[arskemp]

What if I want a little “poke” so there is a little more aggressive stance?

Just a point of reference - not sure what you would consider a little poke, but this should give you an idea on what 0 offset looks like with 37" KO2s (I'd consider that a little poke, but ymmv).

 

[Escape.idiocracy]

What if I want a little “poke” so there is a little more aggressive stance?

This is 17x8.5 et0

Sponsored