The All New BAK Revolver X4s - Information and Group Buy

[hardtofind48]

Good morning Alex,

I recently purchased a used 2021 Gladiator and am looking for a versatile cover and am very interested in this product. I was posting to see if the group buy is still available. I also wanted to ask if the missing parts and easily broken corners have been addressed by the company. Thanks so much!

Sponsored

 

[Toro34]

@RealTruck Hello Alex! Sent you a PM, I would like a quote if the discount is still available!

 

[ArmyMP]

Beware my X4s fell apart after a year.

 

[Fish taco]

Hello,

I just got my 21 Mojave and am interested in the x4s. Does it work with the factory trail rails?

thanks!

 

[RubiNewbCB]

I like the way this guy thinks.... I'd like to consider the same for my '22 Mohave

I have this setup on my 22 JTRD, 2 of the very first Mods, to the rig.

 

[RealTruck]

Beware my X4s fell apart after a year.

I am very sorry to hear this? Have you reached out to BAK at 818-365-9000? Luckily this cover has a 5 year warranty and they would be more than happy to rectify this for you

 

[Greendiator]

@RealTruck I'm interested in buying a x4s tonneau cover if the discount is still available. I also dm'ed you.

 

[Scottbranson17]

https://xtrusion-overland.com/. They make brackets for their rack that are specifically for this tonneau cover. I have the combo and I love it.

 

[Scottbranson17]

RCI Offroad also has adapters that should work with the


I don't think it will fit but probably best to call Rebel and get measurements. The problem with the X4s (and X4) on the Gladiator is that part of it sits directly on the bed rails which takes up prime real estate for the rack.

Max Modular and RCI Off Road have adapters that will allow their racks to work with the X4s. There are also low profile crossbars and platforms that will fit into the t-slots that run along the length of the bed rails.

https://xtrusion-overland.com/. They make brackets for their bed rack that are specifically designed for this tonneau cover. I have the combo and I love it.

 

[DustyGladiator]

@RealTruck
I've been running your revolver x4s for close to 2 years and I couldn't be happier with the cover. I do have a few questions though. I'm currently running a RCI bed rack but in the near future I want to switch to an xtrusion overland rack. The issue is that I want to use the t slot attachments on the rails. My issue is that I'm concerned b cause thebX4S is really only held on by 4 bolts in thin sheet metal. For the tonneau cover alone it's fine, but if I'm attaching a rack with a roof top tent, I worry that it won't b strong enough to hold, especially at speed on the highway, or when seriously wheeling.

So my question is do you guys have a way to reinforce the tonneau cover? Maybe a bracket that will allow the tonneau to be tied into the utility rail or something? If not, I'll probably just drill 4 holes along the rail and bolt the tonneau to the bed that way, but I'd rather use something that you can guys already came up with. The xtrusion overland t-slot connection is slick, i just want it to be a bit more secure.

 

[RealTruck]

@RealTruck
I've been running your revolver x4s for close to 2 years and I couldn't be happier with the cover. I do have a few questions though. I'm currently running a RCI bed rack but in the near future I want to switch to an extension overland rack. The issue is that I want to use the t slot attachments on the rails. My issue is that I'm concerned b cause thebX4S is really only held on by 4 bolts in thin sheet metal. For the tonneau cover alone it's fine, but if I'm attaching a rack with a roof top tent, I worry that it won't b strong enough to hold, especially at speed on the highway, or when seriously wheeling.

So my question is do you guys have a way to reinforce the tonneau cover? Maybe a bracket that will allow the tonneau to be tied into the utility Gage or.something? If not, I'll probably just drill 4 holes along the rail and bilt the tonneau to the bed that way, but I'd rather use something that you can guys already came up with.

I am not aware of any extra hardware to secure the actual tonneau portion. Great looking build!!!

 

[JohnQ]

I am very sorry to hear this? Have you reached out to BAK at 818-365-9000? Luckily this cover has a 5 year warranty and they would be more than happy to rectify this for you

Mine is having some issues as well. Thank you for the BAK contact info. I will try calling them tomorrow. Need to look when I purchased mine but I'm sure its only been a year or slightly older.

 

[RealTruck]

Mine is having some issues as well. Thank you for the BAK contact info. I will try calling them tomorrow. Need to look when I purchased mine but I'm sure its only been a year or slightly older.

I hope that you were able to have any issues resolved quickly. Please feel free to PM me or email me at [email protected] if you require further assistance.

 

[JohnQ]

I hope that you were able to have any issues resolved quickly. Please feel free to PM me or email me at [email protected] if you require further assistance.

Thank you. I haven't tried calling yet. Mine has had a permanent blemish since day one and just recently started coming apart.

 

[Rockabillyroy]

@RealTruck, I was fortunate enough to find a used x4s revolver locally. Of course I would need the jack nuts since they are one time use items. The well nuts happened to be also missing.

I filled out a contact form on your website a while back to see about purchasing the jack nuts and well nuts, but have yet to get a response.

Could you help with either seeing how I could purchase these from you guys or maybe sharing the specific hardware details so that I could try to source them on my own?

Thanks!

Sponsored