How to reset service transmission light

[Birds83]

Vehicle involved- 2023 Mojave 6 speed

I’m looking for a programmer that can reset a service transmission light. Clearing codes with Tazer and disconnecting the batteries doesn’t work.

I need a clutch relearn function. From what I’ve seen it would be
“PCM clutch replacement EEPROM reset procedure” I think.

anyone have any insight on what has this ability.
Thanks guys!

Sponsored

 

[PuddleJumper]

Vehicle involved- 2023 Mojave 6 speed

I’m looking for a programmer that can reset a service transmission light. Clearing codes with Tazer and disconnecting the batteries doesn’t work.

I need a clutch relearn function. From what I’ve seen it would be
“PCM clutch replacement EEPROM reset procedure” I think.

anyone have any insight on what has this ability.
Thanks guys!

Any quality OB2 port scanner thats current chrysler compatible and paired with the Jscan app.

 

[Birds83]

Any quality OB2 port scanner thats current chrysler compatible and paired with the Jscan app.

Good stuff. I thought JScan was the way to go with this one but needed some confirmation ?

 

[PuddleJumper]

Good stuff. I thought JScan was the way to go with this one but needed some confirmation ?

Just gotta emphasize a quality OBII reader that specifies compatibilty with newer chrysler stuff. Jscan will link with anything and then people wonder why that can't get some Jscan features to work.

 

[Birds83]

Just gotta emphasize a quality OBII reader that specifies compatibilty with newer chrysler stuff. Jscan will link with anything and then people wonder why that can't get some Jscan features to work.

Suggestions ?

 

[PuddleJumper]

Suggestions ?

Autel and Foxwell are highly rated. I use my old Beemer OBDLink MX+, it works great. Lets me do an ABS flush which is difficult to swing outside of the dealership.

edit: make sure you get a BT portable one. A full expensive unit will work and won't need Jscan.

 

[Birds83]

Autel and Foxwell are highly rated. I use my old Beemer OBDLink MX+, it works great. Lets me do an ABS flush which is difficult to swing outside of the dealership.

edit: make sure you get a BT portable one. A full expensive unit will work and won't need Jscan.

Thanks man for the insight !

 

[Birds83]

Autel and Foxwell are highly rated. I use my old Beemer OBDLink MX+, it works great. Lets me do an ABS flush which is difficult to swing outside of the dealership.

edit: make sure you get a BT portable one. A full expensive unit will work and won't need Jscan.

Went with the obdlink MX+ it’s been in my Amazon cart for couple months since I decided to go with Tazer instead.
guess live and learn lol.

 

[Birds83]

Autel and Foxwell are highly rated. I use my old Beemer OBDLink MX+, it works great. Lets me do an ABS flush which is difficult to swing outside of the dealership.

edit: make sure you get a BT portable one. A full expensive unit will work and won't need Jscan.

Well JScan and the Mx+ are pretty great.
but unfortunately after going through every page I could find still unable to find the selection I need to reset this clutch ?

I’ve messaged them(JScan) about it but hopefully they have some insight.

Need to be able to do the “PCM Clutch Replacement EEPROM reset procedure”
If I go into limp mode again.

 

[PuddleJumper]

Well JScan and the Mx+ are pretty great.
but unfortunately after going through every page I could find still unable to find the selection I need to reset this clutch ?

I’ve messaged them(JScan) about it but hopefully they have some insight.

Need to be able to do the “PCM Clutch Replacement EEPROM reset procedure”
If I go into limp mode again.

Damn! that sucks. first time i've seen a vehicle be more stubborn than a BMW about sticky codes.

 

[Birds83]

Damn! that sucks. first time i've seen a vehicle be more stubborn than a BMW about sticky codes.

JScan and I have been back and forth and they are gonna get back to me. Hopefully they will see something I don’t or can do a software update and make that option available.

 

[PuddleJumper]

JScan and I have been back and forth and they are gonna get back to me. Hopefully they will see something I don’t or can do a software update and make that option available.

gotta love Jscan support

 

[Birds83]

I was just informed by JScan that the
“ eeprom clutch reset procedure” will be available on the next update of the app for those that need it.

Some of the best customer service !

 

[FijiKid]

Had same issue happen over the weekend. ? … so, only dealer can reset correct? Went in for recall issue … heard they might have not reset after? Anyhow, wondering if after they reset … what are chances light coming up / limp mode again. Curious on what others have experienced. Ty!

 

[Birds83]

Had same issue happen over the weekend. ? … so, only dealer can reset correct? Went in for recall issue … heard they might have not reset after? Anyhow, wondering if after they reset … what are chances light coming up / limp mode again. Curious on what others have experienced. Ty!

Well since it went in for the recall they will reset it no doubt and get it back to you in working condition.

unfortunately it’s a good chance it will
Come back on while not everyone is getting limp mode when the lights on.
If you have or get JScan setup you can reset it on your own until it’s fixed.
Also while it hasn’t happened yet Tazer is looking at making a fix for this issue as well….

out of curiosity any tire or gearing mods and have you made adjustments for them?

Sponsored