Lifted Mojave Club

[SaiintNick]

Can I run 37" KO2's with stock wheels without rubbing anything? Will I need wheel spacers? I have an opportunity to grab some Bronco Raptor takes offs with less than 500 miles on them. Plan is to do the 2" AEV spacer lift in a couple weeks. The weight of the tire is the same basically from the stock AT3's vs 37 KO2's.

Sponsored

 

[Minty JL]

Pics to follow.

MC GC 4.5 on 37x13.5 Maxxis RAZR MTs

 

[AZ_Adventure_Clicks]

AEV 2" spacer on 37" Kenda Klevers. Eclik active shocks replaced the factory stuff that wore out at 75k
https://photos.app.goo.gl/7DWnAPZeh5QyUmir9

 

[SaiintNick]

Can I run 37" KO2's with stock wheels without rubbing anything? Will I need wheel spacers? I have an opportunity to grab some Bronco Raptor takes offs with less than 500 miles on them. Plan is to do the 2" AEV spacer lift in a couple weeks. The weight of the tire is the same basically from the stock AT3's vs 37 KO2's.

Well I jumped on a deal for 5 new takeoffs on a Bronco Raptor for $1200. So far on the road I haven't heard or felt rubbing. The spare also fit under the truck. A real 37" probably wouldn't, but these are barely a 35 as everyone knows. I like the AT3's better, but the KO2's have always been reliable. The weight difference was 1/2 a pound per tire. I think I read the KO2 37's run less wide than the 315's. Thats crazy to me.

Before:

After:

 

[SaiintNick]

Palo Verde trees in St George?

If you say so.

 

[SaiintNick]

Your profile says St George, UT. I dont remember seeing Palo Verde’s there LOL

Yeah I know nothing about trees.

 

[KevinC]

Can I run 37" KO2's with stock wheels without rubbing anything? Will I need wheel spacers? I have an opportunity to grab some Bronco Raptor takes offs with less than 500 miles on them. Plan is to do the 2" AEV spacer lift in a couple weeks. The weight of the tire is the same basically from the stock AT3's vs 37 KO2's.

Yes, yes you can. No you will not need spacers. Maybe a couple of washers on your steering stops and trim the plastic fender liners a little.

 

[SaiintNick]

Yes, yes you can. No you will not need spacers. Maybe a couple of washers on your steering stops and trim the plastic fender liners a little.

Yeah it has a little rubbing somewhere so I'm going to start with zip tying the liner a little and see. Then maybe a trim. Trying not to mess with suspension at the moment.

Sponsored