Dirty Life 9303 DT-1 Wheel 40LBS

[aegiscpo]

Anyone currently running this wheel? Saw it available as a 17x9 -12MM offset 5x5 pattern, listed as 40lbs. Curious to know if anyone is running these wheels, if so what are your thoughts? Would you go with a lighter wheel or stick with the Dirty Life DT-1's? One benefit is later they could be converted to an actual beadlock with the additional ring. If anyone does have them please post pics. Thank you.

Sponsored

 

[sass JT]

I have them with 37” ridge grapplers. Yes the wheels are heavy, especially with my combo. I’ve only had one issue with them since getting them... the center dust cover like to come off and dissapear. I have had to replace twice now and they are spendy. I do like that later on I can buy a new beauty ring or beadlock ring if i wanted. The rings do get beat up on the trail but you don’t notice that.
If I did it again... I’d maybe go to a lighter rim, depends on style. I’ve averaging between 16 to 17 mpg though with factory 4.10 gears.

 

[aegiscpo]

I have them with 37” ridge grapplers. Yes the wheels are heavy, especially with my combo. I’ve only had one issue with them since getting them... the center dust cover like to come off and dissapear. I have had to replace twice now and they are spendy. I do like that later on I can buy a new beauty ring or beadlock ring if i wanted. The rings do get beat up on the trail but you don’t notice that.
If I did it again... I’d maybe go to a lighter rim, depends on style. I’ve averaging between 16 to 17 mpg though with factory 4.10 gears.

Thanks for the feedback... I am thinking about going with these in Bronze, but I am also seriously considering the DV8 886 in Bronze. 10 pounds lighter and almost the same look.

Are these Wheel Centric or Hub Centric? I think I saw they are Wheel centric and the DV8's are hub centric, so that might be a reason to go with the DV8 as well

 

[sass JT]

I had hub centric rings put on at the same time.

https://www.amazon.com/gp/aw/d/B00AAOEVMY?psc=1&ref=ppx_pop_mob_b_asin_title

Good luck on your choice... shopping for the wheel you want is such a pain.

 

[kevman65]

 

[tbaker]

Yep I weighed one but I still love them they look great get a lot of compliments on them

 

[aegiscpo]

I had hub centric rings put on at the same time.

https://www.amazon.com/gp/aw/d/B00AAOEVMY?psc=1&ref=ppx_pop_mob_b_asin_title

Good luck on your choice... shopping for the wheel you want is such a pain.

Are the hub centric rings required?

 

[sass JT]

Are the hub centric rings required?

I don’t think so, they are supposed to be lug centric... I added them for peace of mind

 

[Jaydebe]

Are the hub centric rings required?

The hub centric ring is just a little plastic ring that adds that much more for the ability of the wheel to squarely seat. Required? no, useful, yes.

 

[aegiscpo]

For those that already have the DT-1's, did you get four or five?

Anyone running 37" Cooper STT Pro's? Found in a different thread that the Cooper STT Pro would fit underneath, just looking if anyone who has these wheels can verify with the Cooper. Thanks

Sponsored