What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Goheels0917]

1. I installed a rough country tonneau cover (very high quality by the way)


2. I replaced the trail rated badge with a gladiator one.

3. Finally, as a try, and instead of painting the hooks, I got some rubbers! (Actually are pretty good to be honest) also it reminds us all to put on rubbers...you know...so our hooks don't get dirty..

Sponsored

 

[GWillys]

Not today but this this weekend, finally got around to installing the rockhard patriot sliders

 

[4xjeepr]

Not so much TO my Gladiator however, purchased and am putting together a door storage for when the weather improves enough. Still working on it. Foam getting ready to be applied. Not completed as of yet, still a few more tweaks to eak out.

 

[TrainMan]

Where did you find the coupler/knuckle hitch cover? I worked in a foundry in the 70's (Buckeye Steel) and we poured and finished a million of them, along with bolsters and frames, for Pullman Standard, FMC, and others.

https://railroadcatalog.com/products/cast-aluminum-receiver-coupler?_pos=2&_sid=c3c0124ec&_ss=r

 

[Toyfrog]

Yesterday she got new shoes and socks

 

[mx5red]

Haha. New tires sitting next to my old wheels. Here they are mounted

Less deep, still nice.

As do I. As I was looking at brands this one stood out because of that. Ultimately went with them because of this feature and other things I have purchased. Really good stuff.

The side bed steps are really cool as well. Access to entire bed is so much nicer. These things are a beast

yea I stepped on the corner guard with sandals on and my foot slid forward as I was stepping down, just about broke my foot before I was able to pull myself up and dislodge it

 

[Bbannongmu]

Bestop Tube Doors put on

 

[Jeepin' John]

A nice wash, ah therapy

 

[Troybilt]

Today 3.5 more hours of clay barring. Just over 7.5 hours in the last 2 days. All the rail dust is gone and she has a new coat of wax on her.

 

[XJADDICTION]

Installed the American Adventure Lab high line fender kit made for low fender Max Tow and other 2 piece low fender Jeeps. Not hard to do , quality product.

I kept the fender liners and didn’t split the fenders yet.

 

[Troybilt]

Installed the American Adventure Lab high line fender kit made for low fender Max Tow and other 2 piece low fender Jeeps. Not hard to do , quality product.

I kept the fender liners and didn’t split the fenders yet.

Nice. What was the lead time on them. I ordered a set for JTR and was told 6 weeks out.

I'm thinking of glueing a nut to the inside of the fender so I don't have a screw sticking out. Not sure what to use to bond the nut to the plastic.

 

[lostdd]

Crashed a Bronco festival/show.

 

[lostdd]

Nice. What was the lead time on them. I ordered a set for JTR and was told 6 weeks out.

I'm thinking of glueing a nut to the inside of the fender so I don't have a screw sticking out. Not sure what to use to bond the nut to the plastic.

You can use a 2 part automotive epoxy. We use a few diff kinds in the body shop and they usually do the trick. I can get you more details if needed.

 

[XJADDICTION]

Nice. What was the lead time on them. I ordered a set for JTR and was told 6 weeks out.

I'm thinking of glueing a nut to the inside of the fender so I don't have a screw sticking out. Not sure what to use to bond the nut to the plastic.

I thought about adhesive vs screw. You could leave the screw off as AAL did to start with the high lines and had no trouble without the screws. He said they only added bracket and screws as buyers requested.

They fit tight enough to not use the screws. I just wanted to make sure wind and road speed didn’t make the fender lift.

Lead time for mine was 8 weeks+ but these are for the lower fenders and they had to wait for the brackets to be made.

Your Rubicon AAL order should be less time.

 

[Deleted member 28696]

I love the step on that rear bumper

I agree that step on the bumper is kind of a big deal, nice job looks great!

Sponsored