Search results

I've looked at dozens of buck regulators, but I need one that is fully encased, not the open design like the item above. Thanks for the reply. Any other ideas out there?

I really can't believe this happened and I am so depressed... Just finished installing the SolarHawk panel on my iKamper. Now I find out the Renogy DCC50 max input voltage (VOC) is 25v and the solar panel produces 28v. Are there any options to step down the panel's output? Any other...

Just the stage 1 tune. The bracket has two screws deep down between the battery and PCM. I could get the screws out, but getting them back in will be a challenge. Waiting for the PCM to return before tackling.

*Corrected - I got a new tie rod, not sway bar. The front sway bar is original, links are new Clayton's. I also have an Adams drive shaft. I'm on 35 M/T's, which are worn and about to be replaced. Maybe the worn tires are the culprit and the new tighter steering parts are magnifying the...

Just got new RPM 2.5 ton drag link & tie rod, Teraflex ball joints, Falcon steering stabilizer, and Clayton 2.5" Overland lift. Steering had some play before, but I thought the new steering parts would tighten it up. I still have a good bit of drift. And a new thing started, when making a...

So remove the bracket w PCM attached... I'll take a look, thanks! EOC stage 1

I didn't think four nuts could be so difficult to remove. The top two, no problem. How do you get to the bottom two? I'm sure I'll have to remove some other components, but thought I would ask for help before just ripping stuff out. I can't get a swivel and socket on the bottom passenger...

So far I agree with the comments. It "should" have a positive rake. The Mopar lift is a true 2" and the Clayton 2.5 is really 3 - 3.5". The front height increased an expected 1.5" but the rear went down. The springs are the correct ones. I'm going to the shop on Monday to check it out...

First, the shop has called Clayton and I'm talking to James with Clayton on this forum. I thought I'd see if anyone has experienced this or if anyone has any feedback. I swapped the 2" Mopar lift for the Clayton 2.5" Overland Diesel lift (plus control arms, stabilizer, RPM Steering). These...

I got confirmation from EOC that no flash is required after pump replacement. And they emphasized it has been confirmed with jeep. But when you have the dealer clone the spare, they should also flash any updates needed to both units. Those who report a flash with the new pump were just getting...

I just confirmed with EOC that the clone method above is the correct way to clone an ECU.

Duly noted, thank you.

I'm not following this. Don't you have to remove the freedom panels to drop the windshield? The rack mounts over the freedom panels. Can you show a picture of where the wire penetrates?

This would work for a full rack, but I have a half rack that just cover the freedom panels. The wire would be exposed for a long way to get back there. Thanks for the reply!

I've searched and searched to no avail. How do you route the wire from the roof rack to the engine bay? I don't want to use one of those stick on windshield channels and really don't want to drill the roof. The light bar is an Ironman 4x4 50" LED. I saw this setup on this forum, but have...

I forgot to follow up with the results. Renogy DCC50, KickAss Slim 120AH, assorted Blue Sea breakers and distro panel, SolarHawk solar panel for the iKamper. It's all complete! Thanks for everyone's input.

I also have the 2" Mopar lift and want extra capacity for overlanding. I really like your spring idea. Is your JT gas or diesel? What's confusing is putting a 3" spring in front and a 2" in back, seems the rake would be wrong, but yours looks great. How is that? Is it just the light front...

So far I haven't been able to get an email reply from them, but why would it not work? What do you mean "PCM version"? Are not all 2021 JTRD PCMs the same?

Thank you!!

I want to install the stage 1 tune from EOC. From info learned about this process, I have to buy a new PCM and have it cloned to match my stock PCM. The dealer said they would remove the stock PCM, install the new one, then program it. Is that the same as a clone? Just want to make sure I"m...