Search results

So my tailgate will randomly open sometimes. I'm very careful to shut it and I feel like it's latched, but twice now I've gotten somewhere and walked around the truck only to find the gate is wide open. There's no visual indicator on the dash that it's open, and I have a tonneau, so visually I...

It was honestly the now-deleted post with the clock image re. time is ticking or something to that regard that was posted less than 3 hours after the question was posed - and the tone regarding both the original question and the meme/image that was posted. I'm not sure if you saw it before you...

Looks nice and nice price point. Quick question - In the photos, it looks like the LED is installed in front of the grill and then zip-tied back, around the grill, leaving the "wings" visible. Do you know if it is possible to install the light BEHIND the grill, so the wings are not visible in...

Thanks Rachel. I just submitted a warranty request via your site. I appreciate the help.

I have an iDash in the Aeroforce gauge pod. Works and looks great. Had to wrap the gauge with 3 wraps of electrical tape to get a snug fit but it looks stock honestly.

@ORACLElights - I have a set of the heated LED’s that I’ve had on my truck for about a month and I just noticed I have the burn-in on one of the lights. What’s the procedure for replacement or getting on the list for the ones that don’t have the issue? I can send photos - just want to make...

What @LostWoods said re. BAM. I’ve found them to have the best prices on Mopar stuff. Re the spacer - I wanted it to sit more level and take some of the factory rake out of the truck. It seems to vary, but in general trucks sit slightly higher in the back so that the sit more level when fully...

@lowso - Hey! I'm in Flemington too. I just bought my 2022 JTSD a few months ago. I bought from Chapman over in Horsham PA. We test drove at Flemington in the fall, and they had almost no inventory. When I asked if they could match Chapman's pricing, they looked at me like I was crazy. I...

I love the service, but I hate having to call in every single year and argue to get the price I know they'll give me. If they would just lock me in at that price, I'd pre-pay a 3 year subscription just to not have to deal with it.

So I tried something yesterday to resolve the gap at the cab edge of the cover. I got some of this FROST KING EXPANDING WEATHER STRIPPING. This stuff is pretty cool. It compresses and expands a lot more than most weather stripping. Per the package, it compresses down to 1/4", and expands up...

I'm praying Tazer finds a way to turn this off. Most annoying thing ever. Part of my morning routine is to drop my daughter off at daycare. I'm inside for literally 2 minutes, and it's only a few minutes from home, so I don't like to cut the car off. No need to really. I get there, and get...

Hi there. Sorry I can't answer your question, but I was curious how you liked that bumper. I'm close to pulling the trigger. I love the look of it, but I've heard of questionable quality from Rough Country. How is it?

Yeah - Rotating inward was the one thing I could see. I worried about that with mine too. Those rubber nuts do have some flex to them. I guess it'd be an easy thing to test out. Clamp them or have someone hold the rail tighter/more level and see if it still binds. If that fixes it...

Wow - you STILL don't have a working set yet? I remember reading your posts way back before I even ordered mine. I got mine before I got the truck, and the first thing I did was open the box and check for damage. Thankfully mine were all good. I almost feel like with your luck you have a...

Use a dowel or something to just hold them in place and see if it helps the alignment before you go through the effort of installing rivet nuts in all the holes. Unless your rail is tilted, I don’t totally see how more bolts will change it. Not saying don’t try, I just mentally can’t see how...

So I installed mine without issue, but here's a question that I was curious about reading the above - are your rails parallel to your bed sides from the front to the back? When I first installed mine, I didn't realize the rear rail bolt wasn't tightened all the way, it was just bound - that...

Just adding here - I finally got around to doing this over the weekend. Adding the Arcus hoop was, as noted, super easy. There is a pre-installed welded nut on a bracket for the Venator, you just have to grind that off. Once that was ground off, I hit it with some paint to keep the rust away...

I'd be curious how this turns out of you try this. I feel like silicon could be a good choice because it'll stick, but if you really wanted to pull it off, it would probably come off pretty clean.

I have that same gap. I didn’t even use any weatherstripping on the side rails. They are nice and tight. It’s the gap along the bulkhead, and just like yours, it’s worse by the edges. A heat gun helped the main seal flap down in the middle, but it’s physically lifted up on the sides. My weather...

I installed a BadgeGlow SimpleAux block yesterday. Highly recommend. It doesn't allow you to do anything that direct-wiring won't let you do, but the simplicity of it helps a lot. If you decide you want to move something to another switch, or combine things, it's super simple to move them. I...