🛠️ What's the Best Interior Upgrade You've Made?

[SamO.5]

Sunshade. The first time I went with the freedom tops off, I nearly burnt my head.

https://www.amazon.com/dp/B0932FPTMS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

Sponsored

 

[trust]

The PRP sear covers all around is my only real interior mod, floor mats dont count. I had the cloth seats from the factory

 

[Chasm]

Replaced the dash panels, got rid of the "Rubicon Red" for a pair of color matched panels, looks WAY better!!

I didn't even know that was an option. I kind of like my "denim" ones though.

 

[SaiintNick]

Armorlite will always be the best interior solution.

 

[Chasm]

Other than my speakers and sub, I think my best so far is the little tray that goes into the center console so I can keep a couple of things at the top instead of dropping into the cavern.

Second might be the black contact paper I stuck over the warning labels on the visors.

I've added a cheap sunshade (that I had to modify a little to work with my airbag-safe grab handles and to not block the freedom panels, but as soon as I did, it got rainy and cooler so I haven't really tested it, other than I DO like not having the white ceiling in my peripheral vision.

Of course decent floor mats are always good too. I went with Lasfit. I know they're Chinese junk, but I had good luck with the company on other products, before and after. UPS "lost" my bed mat, Lasfit sent me another and refunded most of the cost.
Sill guards are good too.

My other interior "mods" are the grab bar tray (wife loves it), saddlebag console trays (nice for small trash), seat lever trays (nice for a few small tools), metal door pockets (good for blocking the seat lever! ), and a rear seat cover for the dog. Front seats are staying uncovered. For once I'm going to enjoy the seats instead of keeping them nice for the next owner. Of course dog rides in the front unless she's muddy.

I've pulled a few ideas from this thread for future additions.

 

[J3colt]

Hands down the best thing I’ve added is the Dead Pedal from Quadratec. Well worth every penny!

 

[Bruticus Maximus]

Top 3 for me:
1) ARB Dual Compressor w/ Kraken inflation system under passenger seat
2) AAL full rear seat delete
3) Bulletpoint Rubigrid dash mount platform

 

[WILDHOBO]

They have a disclaimer on the passenger side holder that it partially blocks the mirror. I only bought the one because of that. Mine has been attached via industrial velcro for years without issue. It's worth having the one

I received them today. Driver side is installed. I love it. Thanks very much for the suggestion. It appears like the passenger one might only interfere with the mirror if there’s a large drink in there. Thoughts? As soon as my wife sees this, I think she’s going to want the passenger side.

 

[Dougstdig]

Either my CB bar or Seat Slammer

 

[Mister Lamb]

I received them today. Driver side is installed. I love it. Thanks very much for the suggestion. It appears like the passenger one might only interfere with the mirror if there’s a large drink in there. Thoughts? As soon as my wife sees this, I think she’s going to want the passenger side.

Looks awesome. You use the included adhesive?

And the bigger bottle makes sense. As long as your wife doesn't plan on using a giant tumbler you should be good to go. Your life wont be the same without it if that day ever comes

 

[WILDHOBO]

Looks awesome. You use the included adhesive?

And the bigger bottle makes sense. As long as your wife doesn't plan on using a giant tumbler you should be good to go. Your life wont be the same without it if that day ever comes

I did. I test fit and looked a couple times before using the adhesive, but it seemed dumb not to. Rock solid. The passenger one is still on my desk. Mulling it over.

 

[RickF]

Seat Jackers to improve the angle of the seat cushion and create more thigh support.

 

[WILDHOBO]

They have a disclaimer on the passenger side holder that it partially blocks the mirror. I only bought the one because of that. Mine has been attached via industrial velcro for years without issue. It's worth having the one

I test fit the passenger side with me in the drivers seat. I must be tall enough to not have them be an issue. The mirror is above the holder just barely. It would block a bit with a large beverage in there, but that means my wife is in the car, so I’m ok with that. I mounted it. Looks great. Thanks again for the idea.

 

[Cattywumpuss]

I received them today. Driver side is installed. I love it. Thanks very much for the suggestion. It appears like the passenger one might only interfere with the mirror if there’s a large drink in there. Thoughts? As soon as my wife sees this, I think she’s going to want the passenger side.

Hiya, I have been looking at these window sill cup holders a lot too. I had a couple of questions if you don’t mind as I assume you have had them a while now.

Do they interfere with your access to your air vent, light switch or wing mirror control knobs at all?

Have you had containers taller / heavier than a soda can in them, if so how did the holder handle it?

Thanks so much!

 

[WILDHOBO]

Hiya, I have been looking at these window sill cup holders a lot too. I had a couple of questions if you don’t mind as I assume you have had them a while now.

Do they interfere with your access to your air vent, light switch or wing mirror control knobs at all?

Have you had containers taller / heavier than a soda can in them, if so how did the holder handle it?

Thanks so much!

None of those issues at all. And I’ve had 16oz monster, tall cane sugar glass sodas (in coozies), and coffee cups. No issues. Very cheap mod that isn’t permanent, and really makes a difference on road trips.

Sponsored