4.5" Frankinlift on 40's complete

[Sublime]

Finally finished my Frankinlift.
4.5" Evo Springs
Evo front track bar
Evo rear track bar relocation bracket
Clayton rear track bar
RC geometry drop brackets
Rusty's Front lower Control Arms
Rusty's Rear Upper Control Arms
Fox Shocks
Micky Thompson Baja Legends 40x14.5r20
Vision Tacticals 20x12 -44 offset

Taking it in for alignment tomorrow. Only a slight vibration at 55 mph. I am getting rubbing on my CAs at fill turn which is suprising with this offset.

Sponsored

 

[CoachA]

I am digging it. Well done.

 

[Fastwake]

Finally finished my Frankinlift.
4.5" Evo Springs
Evo front track bar
Evo rear track bar relocation bracket
Clayton rear track bar
RC geometry drop brackets
Rusty's Front lower Control Arms
Rusty's Rear Upper Control Arms
Fox Shocks
Micky Thompson Baja Legends 40x14.5r20
Vision Tacticals 20x12 -44 offset

Taking it in for alignment tomorrow. Only a slight vibration at 55 mph. I am getting rubbing on my CAs at fill turn which is suprising with this offset.

How much $$$ To do my Sport S. Lol

 

[Lynn_F]

Finally finished my Frankinlift.
4.5" Evo Springs
Evo front track bar
Evo rear track bar relocation bracket
Clayton rear track bar
RC geometry drop brackets
Rusty's Front lower Control Arms
Rusty's Rear Upper Control Arms
Fox Shocks
Micky Thompson Baja Legends 40x14.5r20
Vision Tacticals 20x12 -44 offset

Taking it in for alignment tomorrow. Only a slight vibration at 55 mph. I am getting rubbing on my CAs at fill turn which is suprising with this offset.

Looks good man!

 

[Jerhemi]

Dope!

 

[Lunentucker]

Nicely done!
Did you put in something to level the drive line back out some?

 

[Sublime]

Nicely done!
Did you put in something to level the drive line back out some?

Yes, I installed the Rock Jock spacer for the rear drive shaft.

 

[Sublime]

Nicely done!
Did you put in something to level the drive line back out some?

Yes, I installed the Rock Jock spacer for the rear drive shaft

 

[Jerhemi]

What gears are you runnin?

 

[Sublime]

What gears are you runnin?

Will be 5.13. Right now good old stock. But wont be for long

 

[Sublime]

Just got my alignment complete. Looks good except for caster at 6.6. Should be able to adjust the lower CAs to get it to at least 6.

 

[XraytecH]

Finally finished my Frankinlift.
4.5" Evo Springs
Evo front track bar
Evo rear track bar relocation bracket
Clayton rear track bar
RC geometry drop brackets
Rusty's Front lower Control Arms
Rusty's Rear Upper Control Arms
Fox Shocks
Micky Thompson Baja Legends 40x14.5r20
Vision Tacticals 20x12 -44 offset

Taking it in for alignment tomorrow. Only a slight vibration at 55 mph. I am getting rubbing on my CAs at fill turn which is suprising with this offset.

If the alignment does not fix the rub try this...

 

[Sublime]

Well a couple days in and havemt seen any sign of 8th or 7th gear. Knee I would lose 8th but thought I would still see 7th. Regear can't happen fast enough.

Guess it's time to start selling blood.

 

[Jerhemi]

Are you 3.73?

 

[Blade1668]

Well a couple days in and havemt seen any sign of 8th or 7th gear. Knee I would lose 8th but thought I would still see 7th. Regear can't happen fast enough.

Guess it's time to start selling blood.

And a kidney if being done by some companies.
Otherwise great job, sometimes better to "roll your own" mixing and matching parts for what you want.

Sponsored