Aftermarket LED taillights

[Texas_Gladiator]

Those are just bulbs though, I was expecting something along the lines of a complete housing replacement. I don't particularly like the design of the non-LED taillights

Ahhh ok, gotcha. Haven't seen anything like that yet.

Sponsored

 

[Dave S]

Quadratec sells oem led rear tail lights

 

[Reasons]

Yes, there are, these just came out. Mine get delivered tomorrow

https://headlightrevolution.com/vehicles/jeep/jeep-jt-gladiator/

I just replaced all of my Halogen bulbs with LEDs recommended by headlight revolution. The SV4 headlights and fog lights are so worth the $300. The rear reverse light is so bright I no longer get blinded by the rear license plate LED lights that came stock with our Gladiators (backup camera). The reverse LED bulb is superior to Jeeps LED rears. The SV4 fog lights out perform OEM fog light LEDs. As far as headlights go, the SV4s are comparable to OEM LEDs.

Extremely happy with everything and for half the price of Jeep LEDs.

 

[Reasons]

*Update

If you have a Rubicon Gladiator and wish to replace the Bulbs in your fenders with LEDs you need to replace 4 bulbs total. There are 2 bulbs in each fender. 1 dedicated for DRLs and the other for turn signals.

If you order the LED turn signal bulbs from headlight revolution, you need to get 2 sets for just the fenders.

 

[bloran]

I am hoping Oracle makes their blacked out LED JL tail lights for JT. I have not seen anything yet either though

 

[SergioGmz]

Any luck finding Aftermarket Complete LED Tail lights? just had a tour around amazon, ebay, and Quadratec and find nothing

 

[drace99]

Any luck finding Aftermarket Complete LED Tail lights? just had a tour around amazon, ebay, and Quadratec and find nothing

I still have not found anything yet. I called RECON and they are "in the works".

 

[bloran]

Any luck finding Aftermarket Complete LED Tail lights? just had a tour around amazon, ebay, and Quadratec and find nothing

These recently showed up on Quadratec but I don’t like them
https://www.quadratec.com/p/quake-led/step-led-tail-lights-jeep-gladiator-jt-qte1025

 

[MonkWise]

Are you still liking your lights? So was your headlight, fog, and taillights all bulb replacements only or were they complete housings?
Thanks.

 

[drace99]

Are you still liking your lights? So was your headlight, fog, and taillights all bulb replacements only or were they complete housings?
Thanks.

I went with the RECON sequential DRLs and I love them...I also replaced the headlights and fogs with LED bulbs mainly to match the "whiter" light of the LEDs, but overall I am very happy with the upgrades.

 

[brancky3]

I am hoping Oracle makes their blacked out LED JL tail lights for JT. I have not seen anything yet either though

@ORACLElights pleeeeeeeeeeeeaaaaaaaaaaase?

 

[ORACLElights]

@ORACLElights pleeeeeeeeeeeeaaaaaaaaaaase?

We'll ask our R&D to look into options for this! Thanks for the interest

 

[Retro Bait]

I would like to see someone manufacture a better looking taillight housing and lens. The stock units look like an afterthought...sticking out on the sides like a tractor supply utility trailer.

Something smoother, closer to the body and a little smaller.
There is probably some federal regulation that sets minimum size and so forth...but damn these things are ugly

I am looking at building my own after the other mods are done. Something a bit more traditional (aka retro) looking.

 

[Dc71z28]

I would like to see someone manufacture a better looking taillight housing and lens. The stock units look like an afterthought...sticking out on the sides like a tractor supply utility trailer.

Something smoother, closer to the body and a little smaller.
There is probably some federal regulation that sets minimum size and so forth...but damn these things are ugly

I am looking at building my own after the other mods are done. Something a bit more traditional (aka retro) looking.

Agreed. My feelings exactly. I added these pixie decals made. But still not happy.

 

[cecaa850]

The SV4 headlights and fog lights are so worth the $300.

I went with Morimoto LED fog lamp assemblies. They were $205 and are outstanding lights. They aren't listed for the JT but The ones for the 2019 Wrangler work fine but need one line up tab removed for the plug to fit. It took about 30 seconds with a razor blade for each lamp to make them work. Just another option for those looking to replace the entire assembly.

EDIT, I've had mine a while and it looks like they have ones for the JT now.

Sponsored