Rusty PW
Well-Known Member
- First Name
- Russ
- Joined
- Jan 10, 2022
- Threads
- 37
- Messages
- 11,355
- Reaction score
- 30,305
- Location
- Fayette Nam, Pennsyltucky
- Website
- www.youtube.com
- Vehicle(s)
- '22 JTRD, '11 370Z Nismo, '07 Honda VFR
- Build Thread
- Link
- Occupation
- Muff Diver
Came across an issue with the 41.22 remote kit. My battery is weak. It shows less than 12 volts after sitting for a few hours. Have new battery coming.
Went to start the JT today to go to my daughter's house. The JT wouldn't start. Tried the buttons on the 41.22 remotes. Still nothing. Pull the 41.22 relay out and put the oem relay back in place. The JT started right up. I'm thinking that the 41.22 receiver needs 12+ volts to operate. I checked the voltage, it was 11.5 v. Come back from my daughter's house. Swapped the relays back around and checked the battery voltage. It was 12.5. Everything worked the way it should. The voltages were checked with a Fluke meter.
Went to start the JT today to go to my daughter's house. The JT wouldn't start. Tried the buttons on the 41.22 remotes. Still nothing. Pull the 41.22 relay out and put the oem relay back in place. The JT started right up. I'm thinking that the 41.22 receiver needs 12+ volts to operate. I checked the voltage, it was 11.5 v. Come back from my daughter's house. Swapped the relays back around and checked the battery voltage. It was 12.5. Everything worked the way it should. The voltages were checked with a Fluke meter.
Sponsored
