Compartment for bed?

[Trailrider77]

I was wondering if anyone sells a compartment that fits in the bed of the Gladiator where that plastic cover

Sponsored

 

[Gvsukids]

I was wondering if anyone sells a compartment that fits in the bed of the Gladiator where that plastic cover

What was the rest of your thought?

 

[Dilly’S Willy]

What was the rest of your thought?

Assuming the bed outlet cover? Idk any other covers in the bed. The tailgate cover is metal, not plastic, but iirc someone posted a tailgate mod recently the OP may be referring to.

 

[Trailrider77]

This cover is on driver side of bed and is large enough to store something

 

[813 Fabrication & Design]

I was wondering if anyone sells a compartment that fits in the bed of the Gladiator where that plastic cover

I have a few different things designed that can fit in this area. One issue is that it’s only 70 mm deep so there’s really not much space for a compartment to be very useful. The other is the cost to make the pieces that sit in there. With the amount of space that would be gained I’m not sure many people would want to pay what it would cost to have something sit in there. But, I am still working on some ideas to make this space useful. I’m also curious to see if it will go away in future models since things may have changed for the 4xe version of the JT that may not happen now.

 

[RMansfield]

I’ve wondered about usage for this myself.

 

[Jaxmax]

I knew Jeremy at 813 Design would be on it! He makes good stuff and listens ,as you have just noticed!..Jack

 

[Bandit’s Lair]

I give you…..

 

[Bandit’s Lair]

On a more serious note, it is around 2.7”. That may be enough for a good 12V panel or connection point for on board air. I can’t really see it being overly useful for storage but for a custom type connection panel that would be great! Remove then lay out a switch panel to your liking and you don’t have to be scrunched up in the bed trying to figure it out. As long as you stay around 2.5” mounting depth you can do a lot with that size panel.

 

[813 Fabrication & Design]

I knew Jeremy at 813 Design would be on it! He makes good stuff and listens ,as you have just noticed!..Jack

Thanks

On a more serious note, it is around 2.7”. That may be enough for a good 12V panel or connection point for on board air. I can’t really see it being overly useful for storage but for a custom type connection panel that would be great! Remove then lay out a switch panel to your liking and you don’t have to be scrunched up in the bed trying to figure it out. As long as you stay around 2.5” mounting depth you can do a lot with that size panel.

Agreed! I have a few air options put together as well as a mounting plate for a diesel heater. Mount the heater and run exhaust and intake outside.

 

[Bandit’s Lair]

Something like this would be killer if it could be adapted to that panel. Especially if you were going all electric instead of propane for camping. This thread is giving me ideas.

https://powerwerx.com/six-hole-panel-mounting-plate

 

[Gvsukids]

This cover is on driver side of bed and is large enough to store something

https://www.jeepgladiatorforum.com/...r-on-left-wall-of-bed-what-is-this-for.92825/

Sponsored