Exceedfab is looking for product testers.

[tysongladiator]

What kind of jeeps are you looking to test on? Show ready, always clean, and mostly pavement jeeps? Or 200k mile, trail beaten, working jeeps? That's something that people need to know.

If you're looking for a jeep that can show off your products at shows, some jeep owners like myself wouldn't be good candidates. My jeep has over 200k. It has scratches and dents from the trails. It tows weekly. But it does have quite a few modifications. It's not a clydesdale, it's a mule.

So, who do you need?

Sponsored

 

[JTdiRtyD]

Tough decision picking the two or three for each item need to test…
I think each name should be collected and put in a bucket. Once bucket is full, toss all the names up in the air in a stiff side wind and the few names needed that immediately fall and hit the floor, should be picked.

Or toss them into a wind tunnel and if he can grab them, those are the winners.

It really should be selective. If I wanted to test my products I'd be looking at who is going to actually test them in the ways I want to see results from.

Fender liners? I'd want to see them go through hell and see how they held up. Take em on rough trails, take em through salt and snow, mud and rocks, etc.

Light pods? Test em on a rigs with various roof racks to check fitments. Test em in real world scenarios where people are actually using them. Again with different climates, I'd want to see how they hold up to hot and cold, salt, dirt, etc. Same goes for the side steps.

Also need to filter through the folks who are just looking for free or heavily discounted products and likely won't have much valuable feedback to offer.

I'd love to test the fender liners and light pods, but in my trucks current state and with it being winter and I'm changing setups (AGAIN) the only real feedback I could provide right now is durability against road salt and harsh winter roads. IMO I can't provide quality real world testing right now.

 

[WILDHOBO]

Happy New Year!

This is Kelvin. I'd like to find some forum members to help me test the product and give me some honest feedback. If you're interested, please leave a comment below with your trim level and which product you'd like.

This isn't a New Year's giveaway, so no need to thank me. I just want to exchange some inventory for some comments so we can improve the product (and promote it). Of course, if you consider it a New Year's gift, that's fine too!

Anyway, I wish you all the best in 2026! Exceedfab has been around for two years now. I originally wanted to write a thread summarizing what I've experienced over these two years, but I think I'll wait until the 3rd anniversary. Maybe that will be more interesting (also because I've been a bit lazy lately, lol). Thank you for your support and companionship!

Kelvin and the Exceedfab Team

I would have been very happy to test and provide feedback on the fender liners or brackets, but I’m not sure the liners would clear my piggy back shocks. I really enjoy testing things out, and would appreciate being considered for future prototypes or gen 1 products. Another forum sponsor has used me for this, and has been happy with my write ups thus far. Its been a good experience for both sides I think. Kudos for doing this. I think it will make your products better, and expand your visibility as a vendor.

2021 Rubicon 3.6. Highly modified. 37’s, 6.5”rear lift, 4.5” front lift. Always in great shape without damage to anything not designed as a skid plate. It sees real offroad trails, and is used as the jackknife of vehicles.

 

[Bennett]

I responded over on the Wrangler forum as well, but I’ve got a brand new 25 Mojave X that I’m willing to guinea pig any and all parts on. Happy to provide feedback, pictures, etc. Just let me know!

 

[Mbryson]

Lots are looking to run those fender liners, but Ill put my hat in the ring for those. I hit Moab nearly twice a month, would love to run them through the paces at Metal Masher, Poison Spider, FnT and the Jeep safari trails. - 2023 Rubicon Diesel on 37s.

Good thing you have red steering :D I thought I was looking at mine (a bit). Good to see another deezel in Utah.

 

[OffGridJT]

I would be very happy to test out your front inner fenders and/or your rain gutter pod light brackets. I have a 2024 Rubicon X running on 37"s and 3" lift with a ALUCAB MODCAP Family camper set up. Thanks,
Debbie

 

[MeanGreen]

I'd be down to try the front inner fender liners! 2021 Mojave.

 

[Jdon60]

Happy New Year!

This is Kelvin. I'd like to find some forum members to help me test the product and give me some honest feedback. If you're interested, please leave a comment below with your trim level and which product you'd like.

This isn't a New Year's giveaway, so no need to thank me. I just want to exchange some inventory for some comments so we can improve the product (and promote it). Of course, if you consider it a New Year's gift, that's fine too!

Anyway, I wish you all the best in 2026! Exceedfab has been around for two years now. I originally wanted to write a thread summarizing what I've experienced over these two years, but I think I'll wait until the 3rd anniversary. Maybe that will be more interesting (also because I've been a bit lazy lately, lol). Thank you for your support and companionship!

Kelvin and the Exceedfab Team

Hi 2024 Sport S with 3.5 inch Terra flex lift with 35's would like to test the step bumpers, and or inner fender liners.
Thanks in advance
JD Donovan

 

[Gladiatorguy]

Removable Side Step for Gladiator for Jeep JT/A Pair
2 testers are needed.

https://exceedfab.com/products/external-side-pedals-for-jeep-jt

• Suitable for 2020-current Gladiators with factory heavy-duty steel side rails

• Secured with clips, removable in under three minutes for off-road use.

• 400 lbs weight capacity per step, or the factory side rail weight capacity, whichever is less.

• Tight fit to Mopar rail with padded contact surfaces for secure, stable riding and off-road use.

• Stamped anti-slip tread pattern for excellent grip even on muddy shoes.

• Removable stainless steel logo.

• Lifetime warranty on construction, 2-year warranty on finishes.

•Regardless of direction or sequence, each pedal is interchangeable.

2926 Gladiator Willys with factory rock rails. Vehicle is showroom stock so far, 2 weeks old, less than 400 miles. I would love to evaluate the side steps. I have been looking for something like these that are easily removable when desired. Located in SE MI, lots of travel in the mountains of CO.

 

[chad468]

Removable Side Step for Gladiator for Jeep JT/A Pair
2 testers are needed.

https://exceedfab.com/products/external-side-pedals-for-jeep-jt

• Suitable for 2020-current Gladiators with factory heavy-duty steel side rails

• Secured with clips, removable in under three minutes for off-road use.

• 400 lbs weight capacity per step, or the factory side rail weight capacity, whichever is less.

• Tight fit to Mopar rail with padded contact surfaces for secure, stable riding and off-road use.

• Stamped anti-slip tread pattern for excellent grip even on muddy shoes.

• Removable stainless steel logo.

• Lifetime warranty on construction, 2-year warranty on finishes.

•Regardless of direction or sequence, each pedal is interchangeable.

2025 Rubicon. I'd be happy to test out the steps.

 

[red/green hawk]

I'd love to test the SR2 Overland Bedrack to see if I can make it fit with the Softopper I have on there now.

I have a 2020 Sport S Max Tow.

 

[ATL_Rubi]

I have a slight obsession with lights.. would love to test the Gutter Mounts if they aren’t already called for!

2023 Rubicon

 

[MyMojave]

Put me in the hat for the rock rail mounted side steps. I have a 21 Mohave with the factory rock rails. Thanks!

 

[danimal2000]

21 willys. Would be thrilled to test the steps. I believe i have the right rock rails for it

 

[MaximusTX]

Rain Gutter Pod Light Bracket(Pair) for JL/JT
2 testers are needed.（Bracket only，no pods）

https://exceedfab.com/products/exfab-rain-gutter-pod-light-bracket-for-jl-jt

• Compatible with 2018-current JL/JT hardtops
• Fits most pods on the market; we recommend pod sizes under 4.5 inches.
• Each bracket includes two stainless steel bolts for securing the pod.
• Extruded aluminum with CNC machining securely clips onto a Freedom top or back hardtop.
• Reserved 1/4" thread for mounting an action camera.
• Patent pending
• Note: The pods shown in the photos are for display only and are not included in the standard package.

I'd throw my hat in the ring for the these but I wouldn't be able to get any real testing done until later this year. Already doing other upgrades on it now. I have a 22 Rubicon Diesel with a 6.5inch lift on 42s.

Sponsored