Export Tail lights on NA Spec Gladiator

[takeitsleazy]

And nothing for the front aside from reprogramming? Excuse the stupidity, with the amount of crap they added to my jk, I think I’m in denial lol.

Sponsored

 

[Benbean66]

I'd be curious to see a picture of the rear fog light switch. I'll be following this thread simply because I like having something a little different than everyone else, and this is right up my alley. Thanks for sharing!

 

[Benbean66]

http://jscan.net/

@JTRUBI here's a link. You can download the app and it has a Demo version. You can order the OBD2 and bypass cable off amazon

vgate iCar Pro Bluetooth 4.0 (BLE) OBD2 Fault Code Reader OBDII Code Scanner Car Check Engine Light iOS iPhone iPad/Android https://www.amazon.com/dp/B06XGB4873/ref=cm_sw_r_sms_apa_i_D-K5EbFYMKV1F

sportuli Fit for Chrysler -12+8 Cable Adaptor for Autel MaxiSys MS908 MS906S 908S MS905 https://www.amazon.com/dp/B07W4YF2H7/ref=cm_sw_r_sms_apa_i_uaL5EbRRKQDP0

That's what you need for it to work and then buy the license which is $24.

Thank you for this! Been thinking about seeing what all I could change or modify with mine.

 

[JTRUBI]

Honestly I’m not even sure. I know there is a switch that replaces that factory fog light switch but I’ve heard the factory fog light switch will work. I previously was going to hard wire the lights to one of my Aux switch’s if I couldn’t figure out how to enable them like OEM, but this app seems to be what is needed. I won’t be able to actually attempt to try it out until I receive my Gladiator, but starting this post now has helped me try to figure out all the parts I need to make everything work.

I recently found the part number for the export Rubicon hood which I will order closer to when I get my truck. I think I have the part numbers for the mirrors and harness which I will adding as well, along with the taillights. So all in all I think it will come out pretty unique with the parts installed.

And nothing for the front aside from reprogramming? Excuse the stupidity, with the amount of crap they added to my jk, I think I’m in denial lol.

 

[Jeeperjamie]

Honestly I’m not even sure. I know there is a switch that replaces that factory fog light switch but I’ve heard the factory fog light switch will work. I previously was going to hard wire the lights to one of my Aux switch’s if I couldn’t figure out how to enable them like OEM, but this app seems to be what is needed. I won’t be able to actually attempt to try it out until I receive my Gladiator, but starting this post now has helped me try to figure out all the parts I need to make everything work.

I recently found the part number for the export Rubicon hood which I will order closer to when I get my truck. I think I have the part numbers for the mirrors and harness which I will adding as well, along with the taillights. So all in all I think it will come out pretty unique with the parts installed.

I'm considering those rear foglights as well after reading about them in this thread. I was looking yesterday and it seems like a pretty easy install.

 

[Psycho Squirrel]

I'm liking where this is going! I think the amber turn signals make way more sense than red. I will likely be doing the swap as well. What do the export spec hood and mirrors look like?

 

[JTRUBI]

I'm liking where this is going! I think the amber turn signals make way more sense than red. I will likely be doing the swap as well. What do the export spec hood and mirrors look like?

Thanks man. I’ll start a build thread once I actually pick up my Gladiator. Looks like about a month until it’s shipped. The export hood is a little higher and it isn’t curved at the front like the standard NA Gladiator hood is. It’s the one they used on the Wayout Concept

the mirrors have a turn signal marker light on the sides.

 

[takeitsleazy]

I do remember the side mirror markers- that is a pricey swap I’d imagine. Generally they (English mechanics) just slapped an led strip on the side of the doors of any US vehicles that needed a euro conversion; looked terrible.

 

[Benbean66]

Thanks man. I’ll start a build thread once I actually pick up my Gladiator. Looks like about a month until it’s shipped. The export hood is a little higher and it isn’t curved at the front like the standard NA Gladiator hood is. It’s the one they used on the Wayout Concept

the mirrors have a turn signal marker light on the sides.

Wow. I love that hood. I love the mirrors too, but I just installed the Oracle Sidetrack led's, and that might look a little silly with both.

 

[LaterGator]

So where is the rear foglight switch mounted? Is it separate from the front foglight switch? Be great to save an aux switch for my rear lights. Where do the rear foglights mount? Are they mounted in the bumper? Is the new rear harness all that is needed to power them?

 

[Psycho Squirrel]

Have you found the part numbers and prices for the tail lights?

 

[JTRUBI]

I’ve seen a picture of the switch but can’t seem to find it. The rear fog lights mount in the bumper and replace the reflectors that are there. Tbh I’m not 100% sure just swapping the harness and the lights in and reprogramming it will make the lights work but I’m going to try it out and see.

So where is the rear foglight switch mounted? Is it separate from the front foglight switch? Be great to save an aux switch for my rear lights. Where do the rear foglights mount? Are they mounted in the bumper? Is the new rear harness all that is needed to power them?

 

[JTRUBI]

Have you found the part numbers and prices for the tail lights?

Not yet but I am working on trying to get a part number for them.

 

[JTRUBI]

Just ordered the mirrors should be here next week. Still trying to get part numbers for the tail lights.

 

[atmotocrosser]

Looking forward to your build.

Sponsored