Fox 2.0 steering stabilizer question?

[Jocww]

Hows the traction on and off road? How was it in the rain this weekend?

Sponsored

 

[Jocww]

Interesting,, I've not heard anything bad about them.
And vetted all tires before my purchase. \
The Grabber ATX, took almost no weights when balancing.
And are comfortable and quiet.

looks good in white like a storm trooper.

 

[4MOTION]

Hows the traction on and off road? How was it in the rain this weekend?

Superb !! Tractions is great, excellent confidence in the rain, although they tend to collect rocks in the tread.

 

[seven30]

My stock one is leaking and I experienced DW twice. Dealer says its backordered. So installed a 2.0 IFP this afternoon. 18mm socket and wrench. 45 minutes taking it slow.

Will have to do some real driving before I can report any improvement.

 

[Rocksalt]

so how has this improved steering?

 

[troopertrek]

Here’s the issue… and the dealer would not sell me just one. I had to buy the 5 pack. ?

 

[troopertrek]

I installed the Fox stabilizer and the lower control arms from the Mopar 2” lift when I installed a teraflex 1” puck up front. Along with an alignment. 21 gas Rubicon. Drives like different vehicle. 1 finger steering at highway speed with no issue. The LCA’s are ever so slightly longer but all that is needed. Gives you a couple degrees caster which along with the stabilizer made a huge difference in my case.

 

[Brahmajoe]

FYI, my dealer had to order for me in a 5 pack. If anyone can't get one I'll be a supplier for 4 extras plus shipping!

I could use 1

 

[R0BSTR0SITY]

I could use 1

I could also use one. I received the Fox ATS a couple of weeks ago, still waiting on the backordered bolt ( 6510774AA ) to ship from Quadratec. Really bums me out because it showed the bolt was in stock on their website when I ordered. Then after an email with order confirmation, I get the email with the backordered/out of stock notification.
I know its only a couple of bucks, I have been fighting the urge to order the bolt from another website or try to source one from a local dealer. Trying to be patient...
I really thought I would be waiting on the stabilizer to arrive since it was out of stock from several vendors a few months ago.

 

[Brahmajoe]

Able to purchase the exact Bolt from Home Depot with nut and washer.

Carriage bolt, $1.68
Hex nut, $0.24

What size bolt ?

 

[Brahmajoe]

I could also use one. I received the Fox ATS a couple of weeks ago, still waiting on the backordered bolt ( 6510774AA ) to ship from Quadratec. Really bums me out because it showed the bolt was in stock on their website when I ordered. Then after an email with order confirmation, I get the email with the backordered/out of stock notification.
I know its only a couple of bucks, I have been fighting the urge to order the bolt from another website or try to source one from a local dealer. Trying to be patient...
I really thought I would be waiting on the stabilizer to arrive since it was out of stock from several vendors a few months ago.

I just contacted my dealer $4 will be there tomorrow in the am

 

[Brahmajoe]

I just contacted my dealer $4 will be there tomorrow in the am

What’s the torque specs when putting on the jeep?

 

[Tech Tim]

What’s the torque specs when putting on the jeep?

My notes say 59ft-lbs.

 

[Tech Tim]

For anyone looking, we have the bolts in stock:
https://www.northridge4x4.com/part/hardware/6510774aa-mopar-hex-flange-head-bolt

 

[rickytam]

My ‘21 was built Oct 26, my bolt looks to be the old style, no issues here...installed easily.

I bought a FOX Steering stablizer Thru-Shaft -- and I cannot get that carriage bolt out after removing the 18mm nut.

How did you manage to get that bolt out?

Sponsored