Gladiator rail system

[markamis]

I have the 2026 gladiator JT ,and I want to put the rosy pixel rail system on my truck for cargo tie downs ,here's the problem , I have the plastic bed liner ,on the sides you have little dimples that show you where you need to drill threw the liner to get to the threaded holes for the rails , but the back of the liner against the cab has no such dimples, how do I find where to drill out the holes ,I could use any and all suggestions please ,

mark b

Sponsored

 

[Gvsukids]

I have the 2026 gladiator JT ,and I want to put the rosy pixel rail system on my truck for cargo tie downs ,here's the problem , I have the plastic bed liner ,on the sides you have little dimples that show you where you need to drill threw the liner to get to the threaded holes for the rails , but the back of the liner against the cab has no such dimples, how do I find where to drill out the holes ,I could use any and all suggestions please ,

mark b

Maybe these will,

https://www.jeepgladiatorforum.com/...remove-bedliner-from-pre-drilled-holes.56697/

https://www.jeepgladiatorforum.com/forum/threads/uinta-bed-rails-and-bed-liner.80074/

https://www.jeepgladiatorforum.com/forum/threads/bed-liner-in-bolt-holes.38701/

 

[GA D90]

When I run into stuff like that... I would thread a bolt part way in to the holes, and hit the head of the bolt with some wet paint, and just carefully push the liner against them. should get you close enough.

Sponsored