GOBI Gladiator JT Club

[Walldo]

Looks good, have to agree with Gobi Wan K, I have grown to like the mat red Rubicon dash.

Sponsored

 

[doshounds]

Finished up my lift and wheels and tires yesterday. Now time for bumpers and winch.

 

[tbaker]

Well come on tell us what size tires and what wheels are those and what size lift you did

 

[doshounds]

Well come on tell us what size tires and what wheels are those and what size lift you did

Ha ha. Pretty simple, Mopar 2” lift with 1.5 Teraflex level kit and .75 inch spacer in rear. I also added Rock Krawler adjustable track bar up front and Rock Krawler rear track bar bracket to center things up. The wheels are Quadratec 41 wheels in bronze wrapped in 37 in Ridge Grapplers.

 

[tbaker]

Sharp looking gladiator

 

[HemiMagnum1]

Finished up my lift and wheels and tires yesterday. Now time for bumpers and winch.

I went with those wheels too! Just installed an AFE Intake and AFE Vulcan Quad Exhaust!

 

[HemiMagnum1]

I went with those wheels too! Just installed an AFE Intake and AFE Vulcan Quad Exhaust!

 

[HemiMagnum1]

 

[doshounds]

Good Looking rig!

 

[Chazo24]

Finally got my mopar tube doors! Have to say these things are well built. Sad that there are no OEM mirrors with them but these Chupacabra roll cage mirrors did the trick ($35 Amazon).

Now if only my Diamondback HD would come in....

 

[jasonclarkusaf]

Just finished the install of the 3” Rock Krawler Pro-X with Falcon 3.3 shocks. I love everything about it!!
Here is it on 38/13.5/17 Patagonias with Vision Manx 2 wheels

 

[Nick83]

I've owned lots of new vehicles over the years but here I am... signing up for forums and obsessively gawking at all the stuff people are doing to theres. I really love this truck and am very much looking forward to getting these dinky rims and tires off. I just put on the mopar steel bumper and ended up having Jeep install the upgraded mopar LED headlights. They are super simple to put in but it needed some additional wiring for the halo day time running ring to work and it needed to be flashed so had them do it. After hours and hours of going back and fourth I've settled on doing the 2in mopar life with 35s. I LOVE the way 37s look on these but I think that might be biting off more than I can chew since I'd have to re-gear then maybe think about a new drive shaft and ball joints. So I'll maybe just have to work my way up to it while still enjoying a much more aggressive look

Some other small things I did to it was Linex the bed, did the mopar grab handles front and rear, the topographical mud liners and a stubby antenna. Only other plan after a lift wheels and tires is a hard low profile bed cover

 

[Mr. Wuf]

My lift came in yesterday. I’m ordering tires and wheels next week. I’m torn between ordering the Black Rhino wheels I really want or saving several hundred dollars and getting a set of soft 8s for next to nothing.

 

[LoJac963]

I've owned lots of new vehicles over the years but here I am... signing up for forums and obsessively gawking at all the stuff people are doing to theres. I really love this truck and am very much looking forward to getting these dinky rims and tires off. I just put on the mopar steel bumper and ended up having Jeep install the upgraded mopar LED headlights. They are super simple to put in but it needed some additional wiring for the halo day time running ring to work and it needed to be flashed so had them do it. After hours and hours of going back and fourth I've settled on doing the 2in mopar life with 35s. I LOVE the way 37s look on these but I think that might be biting off more than I can chew since I'd have to re-gear then maybe think about a new drive shaft and ball joints. So I'll maybe just have to work my way up to it while still enjoying a much more aggressive look

Some other small things I did to it was Linex the bed, did the mopar grab handles front and rear, the topographical mud liners and a stubby antenna. Only other plan after a lift wheels and tires is a hard low profile bed cover

I tend to agree. I absolutely love the look of these with a 2" lift and 37s but I just don't think I need 37s. Can you post of pic with yours on the 2" lift with 35s?

 

[peteawalk]

I tend to agree. I absolutely love the look of these with a 2" lift and 37s but I just don't think I need 37s. Can you post of pic with yours on the 2" lift with 35s?

I second that request Not looking to do a re-gear and don't plan on mobbing that heavily off-road yet.

Sponsored