Harbor Freight Wheel Dolly

[Jesnamy01]

Has anyone used this with a 13.5" wide tire? This is what their information says " The open-side lift rolls into place and fits vehicle wheels up to 34 in. H x 11 in. W. "

They have it on sale for Black Friday and I am going to be doing my own tire rotations.

1300 lb. Capacity Self-Loading Positioning Wheel Dolly

Sponsored

 

[JTL21]

No personal experience but seems like possibly a bad idea. Not only are your tires bigger than spec but it’s likely your truck is too heavy as well. Not saying it couldn’t work but it might be risky.

 

[40x40]

Has anyone used this with a 13.5" wide tire? This is what their information says " The open-side lift rolls into place and fits vehicle wheels up to 34 in. H x 11 in. W. "

They have it on sale for Black Friday and I am going to be doing my own tire rotations.

1300 lb. Capacity Self-Loading Positioning Wheel Dolly

i run 40x13.50 tires with an 11" wide tread and own 2 of these. they are worth the $$$ when trying to move these biggins around. if they were larger i wouldn't complain but for the back pain savings, i would buy them again. they are not wide enough to slide under the tires when the jeep is on the ground. i only use it to rotate tires when it is jacked up.

 

[Jesnamy01]

i run 40x13.50 tires with an 11" wide tread and own 2 of these. they are worth the $$$ when trying to move these biggins around. if they were larger i wouldn't complain but for the back pain savings, i would buy them again. they are not wide enough to slide under the tires when the jeep is on the ground. i only use it to rotate tires when it is jacked up.

Thanks! Thats exactly what I was wanting to know and what I was planning to use it for. Appreciate your response!

 

[MaximusTX]

I have them and use them to move my chevelle around in the garage and they work great. I can check and see if they fit the 42x13.5R20 on the gladiator.

 

[Minty JL]

I have them and use them to move my chevelle around in the garage and they work great. I can check and see if they fit the 42x13.5R20 on the gladiator.

You have an interesting collection of vehicles

 

[Jteakus]

OP, where in LA do you reside?

 

[Rusty PW]

I got mine from Summit Racing. It's hydraulic instead of a ratchet mechanism. I paid more for it. It can handle a 12" wide tire. The HF is only at 11" wide.

https://www.summitracing.com/parts/sum-918070

 

[Jesnamy01]

OP, where in LA do you reside?

Northshore

 

[Jteakus]

Not much wheeling down there. If you ever head to Hot Springs AR or Barnwell Mt TX, let me know.

 

[MaximusTX]

You have an interesting collection of vehicles

Thanks, I like a lot of different vehicles. There are only a few I don't really care for.

Has anyone used this with a 13.5" wide tire? This is what their information says " The open-side lift rolls into place and fits vehicle wheels up to 34 in. H x 11 in. W. "

They have it on sale for Black Friday and I am going to be doing my own tire rotations.

1300 lb. Capacity Self-Loading Positioning Wheel Dolly

I tested them on my JTRD with 42x13.50R20 and they do not fit. You can't even get the dolly around the wheel. If you don't have 42's they would probably work fine.

 

[Jesnamy01]

Not much wheeling down there. If you ever head to Hot Springs AR or Barnwell Mt TX, let me know.

Will do! Thanks

 

[Jesnamy01]

Thanks, I like a lot of different vehicles. There are only a few I don't really care for.


I tested them on my JTRD with 42x13.50R20 and they do not fit. You can't even get the dolly around the wheel. If you don't have 42's they would probably work fine.

Ok thanks. Currently have 37x13.50

 

[Minty JL]

Thanks, I like a lot of different vehicles. There are only a few I don't really care for.


I tested them on my JTRD with 42x13.50R20 and they do not fit. You can't even get the dolly around the wheel. If you don't have 42's they would probably work fine.

I used to own only GM and now I have 2 jeeps and a fuckin Volvo......I enjoy them all, they each have their purpose and duty

 

[Rusty PW]

Ok thanks. Currently have 37x13.50

Mine won't fit around a 37" unless the tire is off the ground. The way I use mine is to remove the tires from the JT. Put the tire on the dolly, jack it up a little. Move the dolly and tire into place. Rotate the tire to line up the studs and bolt holes. Push it into place, install the lug nuts.

Sponsored