iphone car mount

[onewhippedpuppy]

Scosche Proclip magnet mount, installs quickly without tools and holds the phone securely in a convenient spot without blocking the vents. Easily adjusts left and right and could be mirrored on both sides if you need two. I love this thing.

SCOSCHE Compatible with 2018 to 2022 Jeep Wrangler JL, 2021 to 2022 Jeep Wrangler 4xe and 2020 to 2022 Jeep Gladiator ProClip XL Center Surface Dash Mount with MagicMount PCXLCR01 https://www.amazon.com/dp/B085Z6JTNH/ref=cm_sw_r_cp_api_i_E953SJNRB3J1KHTBED1T?_encoding=UTF8&psc=1

Sponsored

 

[JTR178]

How easy is it to swap to the original offRoam for off road bouncing, or does the magnet hold it well through that?

If I could find a real working wireless CarPlay adapter this would be huge.

I only ordered the offroam base. MagSafe hasn't failed me yet. I've got the Carlinkit 3.0 plugged into the center console and it's worked well for me over the year of ownership.

 

[Holes]

Well justified, now that I'm riding higher on 3.5" lift I can see down in cars, so true, even delivery drivers are driving with their phones, ugh!!

Indeed.
I have a 3.5” lift I’m wanting to put in but life keeps getting in the way...

Maybe in a couple weekends. Ugh...?

 

[Iowafarm]

I thought about the driver side unit but I really like symmetrical/balance and opted for the full unit. Totally agree on quality. Holes lined up, fit nice and I’m sure it will outlive the Jeep. ?

I agree with the full mount looking nicer. But there isn't alot of space in the jeep to put stuff. I didn't want to give up the whole tray up there.

 

[Holes]

Your passenger is going to have a bad time if that airbag deploys.

Going to be a bad ride. ?

 

[WMWHV]

I have had the 67 Designs arm and phone holder on a Carolina Metal Masters ball mounted on the passenger grab bar for a year and a half. The 67 Designs equipment is great and the ball mount is fine except for the fact that is scews into plastic and every time I put the phone in or took it out, it put counter clockwise torque on the ball and unscrewed it. I feared stripping it out if I tightened it too much. Yesterday, I had a great idea and replaced my 67 Designs phone mount with an L9 mount (photo attached). It is just like the 67 Designs unit, except when you put the phone in or take it out, it puts clockwise torque on the ball, thus tightening it instead of loosening it. It seems more natural pulling the phone toward me than pushing it away. I wish I had thought of this long ago. The L9 mount is free to owners of the 67 designs mount. The installation is a bit different.

 

[CerOf]

I have had the 67 Designs arm and phone holder on a Carolina Metal Masters ball mounted on the passenger grab bar for a year and a half. The 67 Designs equipment is great and the ball mount is fine except for the fact that is scews into plastic and every time I put the phone in or took it out, it put counter clockwise torque on the ball and unscrewed it. I feared stripping it out if I tightened it too much. Yesterday, I had a great idea and replaced my 67 Designs phone mount with an L9 mount (photo attached). It is just like the 67 Designs unit, except when you put the phone in or take it out, it puts clockwise torque on the ball, thus tightening it instead of loosening it. It seems more natural pulling the phone toward me than pushing it away. I wish I had thought of this long ago. The L9 mount is free to owners of the 67 designs mount. The installation is a bit different.

LOL!!

Took me a few seconds to clue in. Nicely done.

 

[WMWHV]

LOL!!

Took me a few seconds to clue in. Nicely done.

I did have to adjust the mounting position of the stalk a bit to the right to provide clearance for the phone mount opening to the left so that it did not hit the radio knob when I pulled the phone out.

 

[redfish]

This is the way.

Offroam base + Spiegen MagSafe wireless charger.

Run cable behind dash panels for a clean install. Doesn't obstruct the windshield, which is a huge pet peeve of mine.

How did you mount the Magsafe to the offroam? I have both but the offroam ball that mounts to the vent is bigger than the Spiegen female ?

 

[JTR178]

How did you mount the Magsafe to the offroam? I have both but the offroam ball that mounts to the vent is bigger than the Spiegen female ?

What size ball did you order? 17mm fits. I probably should have made that more clear. My bad.

 

[redfish]

What size ball did you order? 17mm fits. I probably should have made that more clear. My bad.

Thank you, I already had the “ whole kit” which is a 20mm ball

 

[BAT]

Been running the 67 designs for 2 years and it has been rock solid

 

[MajorUrsus]

Happy with the Bullitpoint. Easy to install. Also works for dash cam and passenger phone. Where I place the phone it is low and does not obstruct vision out front window or the 8.4 display. Also was able to route power cables under and through in a clean manner!

Agreed. So far I’m super happy with my Bulletpoint setup as well.

 

[MajorUrsus]

Agreed. So far I’m super happy with my Bulletpoint setup as well.

 

[Artsifrtsi]

I have two of these - one in my Gladiator and one in the wife's JL. They are solid and mount using the two factory screws in the top center of the dash under the rubber tray. No drilling. The only thing I added is I replaced the four adhesive foam grip pads on the gripper arms with 4 small rubber grommets (home depot specialty hardware drawer). The adhesive on the foam pads was slipping from the sun heating it up. Problem solved.

I have one of these too, have had it for almost 2 years now, and it had been great.

Sponsored