Let's see those Mojave's and Mods

[Arisdocjk]

I don’t think any improvement in performance. I just like the look of it lifted. The kit came with shock extensions, bump stops, and longer sway bar links. It also included a spacer for the rear driveshaft

Sponsored

 

[AmericnGladiator]

Did you use the stock Mojave front skid?

No… the MotoBilt Crusher covers it!

 

[MLMojave]

 

[The White Rabbit]

No… the MotoBilt Crusher covers it!

You mind posting pics of the front with reservoirs?

 

[AmericnGladiator]

You mind posting pics of the front with reservoirs?

hope this helps

 

[Fcmalie]

Thanks for posting this! I’ve been trying to find a rack that bolts to the BAK X4s. Looks like you got the 56 inch long rack. What height did you get?

I believe it is a 22" rack, the uprights are 20" long. I'm making flip up side panels out of 5 large molle panels on each side. Working on latching ideas and locking gear mounts now.

 

[The White Rabbit]

hope this helps

Perfect! Thanks

 

[Sonoran_Mohavey]

Modded Mojave Checkin in ??

 

[drew0622]

I just added the AEV spacer kit. I think it turned out perfect and didn’t affect the ride any.

Can you tell me what light mounting kit (on front bumper) that is? I dig it!!! thanks!

 

[Arisdocjk]

Th one from Quadratec

 

[Bjeepz]

Now that gas is more expensive than hookers and cocaine Jeep finally called to say my Mojave is built and they're just waiting on delivery details!!

I've run the WARN Rock Crawler Stubby on the front of all of my jeeps as I like the price, design, weight etc.. wondering if anybody has one of these bumpers and how well it fit up with the factory skid plate.

Also wondering for those that have installed front bumpers and a winch how much the front dropped with the factory suspension? The WARN bumper comes in around 65lbs and my M8000s is just about the same, both possibly 2-3 lbs below the 65#.

Thanks!

 

[DesertGladiator]

Now that gas is more expensive than hookers and cocaine Jeep finally called to say my Mojave is built and they're just waiting on delivery details!!

I've run the WARN Rock Crawler Stubby on the front of all of my jeeps as I like the price, design, weight etc.. wondering if anybody has one of these bumpers and how well it fit up with the factory skid plate.

Also wondering for those that have installed front bumpers and a winch how much the front dropped with the factory suspension? The WARN bumper comes in around 65lbs and my M8000s is just about the same, both possibly 2-3 lbs below the 65#.

Thanks!

When I added my bumper and winch the front dropped about an inch. I just stuck one of those Teraflex 1" spacers up in there and it brought it back up, no issues.

 

[Bjeepz]

When I added my bumper and winch the front dropped about an inch. I just stuck one of those Teraflex 1" spacers up in there and it brought it back up, no issues.

Thanks for your reply. I creeped your posts a bit to see what you have up front, wondering if you may know the weight of the bumper and the winch you have?

Thanks.

 

[DesertGladiator]

Thanks for your reply. I creeped your posts a bit to see what you have up front, wondering if you may know the weight of the bumper and the winch you have?

Thanks.

I think the bumper was 75ish because I didn't put the end caps on, winch was 65 with synthetic rope. I had to remove the Mojave skid plate too.

 

[Bjeepz]

I think the bumper was 75ish because I didn't put the end caps on, winch was 65 with synthetic rope. I had to remove the Mojave skid plate too.

Thanks, that is pretty close to my weights so it gives me a good idea of what to expect.

I need to make sure the bumper I get doesn't require remove the factory skid plate so it is possible I might need to pick a different bumper if I find out the WARN doesn't work for me this time.

Sponsored