Sponsored

Looking for Bed Rack suggestions that work with trifold tonneau cover

WVKev

Member
First Name
Kevin
Joined
Dec 17, 2022
Threads
2
Messages
15
Reaction score
63
Location
Kansas
Vehicle(s)
2022 Jeep Gladiator Willys
Hello I am looking for a bed rack that will work with a trifold tonneau cover. We will be placing a Body armor soft shell RTT on it. I have experience with Billie Bars from a previous Gladiator that I had, but we may go with a hard shell tent in the future so I believe I will need a rack that sets higher to accommodate for that. Thanks in advance.
Sponsored

 

eburt556

New Member
First Name
eric
Joined
Nov 22, 2025
Threads
0
Messages
1
Reaction score
0
Location
alabama
Vehicle(s)
23 gladiator
I installed a Lost Canyon rack a few months ago. Purchased on the Quadratec site on sale for $800. It’s the full height rack with a load rating of 750 lbs static weight. It’s a solid design. Took less than 2 hrs to install solo. It may be worth checking out if it fits your needs. I have not purchase the tent yet but plan to. Also it works with their trifold cover or their roll up cover. My alien sunshade trifold doesn’t have room to fold back. But I slid it in laying flat and worked fine. Only use the cover when we travel due to not be able to fold it back.
 

peter dragon

Active Member
First Name
Gary
Joined
Oct 12, 2025
Threads
7
Messages
39
Reaction score
83
Location
payon az
Vehicle(s)
2025 Gladiator
Just build your own using T slot material from places like TNUTZ or 80/20. You could make it as high as you want and it will accommodate heavy attachments. Its cheaper (~$800) than buying some of the ones made from sheet metal and is far stronger since it's all solid aluminum extrusion. I have the trifold cover that had to open and there aren't any out there that would accommodate it.

Jeep Gladiator Looking for Bed Rack suggestions that work with trifold tonneau cover 20260310_141334
 
Last edited:

TRUKD

Peak Sponsor (Level 2)
First Name
TRUKD
Joined
Feb 23, 2023
Threads
6
Messages
57
Reaction score
83
Location
Pittsburgh, PA
Vehicle(s)
2021 Toyota Tacoma, 2020 Jeep Gladiator Rubicon
Check out TRUKD Bed Racks! Our 24.5" T-Series is specifically engineered to work with tri-fold tonneau covers. This height allows you to fully open the cover for bed access while providing enough clearance to extend a hardshell tent over the cab. Our racks are made from stainless steel and are 100% manufactured right here in the USA! We have a 300lb dynamic and 1,000lb static load rating.

https://gettrukd.com/products/trukd-24-5-v2-bed-rack?variant=42987764318384
 

joedan916

Member
First Name
joe
Joined
Jan 13, 2025
Threads
1
Messages
24
Reaction score
7
Location
Freedom1971!
Vehicle(s)
2023 jeep gladiator
Hello I am looking for a bed rack that will work with a trifold tonneau cover. We will be placing a Body armor soft shell RTT on it. I have experience with Billie Bars from a previous Gladiator that I had, but we may go with a hard shell tent in the future so I believe I will need a rack that sets higher to accommodate for that. Thanks in advance.
If you have the trifold with Tslots, check out MONOKING, they have well built products, just got the roof rack w/the ladder.. 2023 Gladiator WILLYS SPORT S
Sponsored

 
 







Top