Looking for someone with 2" Lift w/ 35 & 37s

[Blucid]

My garage is 82 Inches at the opening and can not be modified.
I am running 33s right now @ stock height, I am wondering what the height difference is between a 2" Lift with 35s and or 37s. I have a RTT on the back and there is about 4 inches left between the top of it and the garage opening.

Sponsored

 

[kevman65]

Perfect world, with 35" and lift would be 3" gain.

37" and lift would be 4" gain.

Not a perfect world though. Tire true height is generally less than the class they fall in.
Lifts are showing to be taller than advertised.

 

[Gren71]

Lifts are showing to be taller than advertised.

i think thats because a lot of lifts are allowing us to keep the oem spring isolators. I don’t remember any of my Jk lifts keeping them like on this JT

 

[DeezJT]

I have MC 3.5 lift and 37’s. I fit under an 80” garage.

 

[highoctane]

Evo Mfg 2.5” lift and 37” Nitto Trail Grapplers on my JT. Clears an 82” opening.

 

[AzRob]

My Rubicon... with Mopar 2" lift and 35's that actually measure 34.5" total height 78 inches or 6' 6" to the tallest area near the back of the hard top.

 

[kevman65]

Guys, he's not worried about the roof clearing, he's worried about his RTT on his rack clearing.

 

[Renegade]

Guys, he's not worried about the roof clearing, he's worried about his RTT on his rack clearing.

You and your reading comprehension....We don’t need that crap on the internet!

 

[AzRob]

Guys, he's not worried about the roof clearing, he's worried about his RTT on his rack clearing.

We can read, but not all of us have bed racks or a tent, so we can only give him the measurements we have that he asked for.... 2" lift on 35's or 37's.

Hopefully he can take some of the provided measurements and translate it to his vehicle and garage situation. At least with my numbers above in my previous post... if his tent is above the roof he can add that number to my total and see if it fits... RIGHT?

 

[Blucid]

My Rubicon... with Mopar 2" lift and 35's that actually measure 34.5" total height 78 inches or 6' 6" to the tallest area near the back of the hard top.

Thank you so much for this, exactly what I was looking for.

 

[Blucid]

Guys, he's not worried about the roof clearing, he's worried about his RTT on his rack clearing.

Someone knows how to read

 

[kevman65]

Something else to consider.

Is your driveway at the garage level, sloping down away from, or sloping up away from garage?

If you have a slope, it will affect the height (angle of RTT relative to garage floor)

My driveway slopes up away from garage. My old F250 4x4 I could pull into the garage, but it wouldn't fit backed in.

 

[Blucid]

Something else to consider.

Is your driveway at the garage level, sloping down away from, or sloping up away from garage?

If you have a slope, it will affect the height (angle of RTT relative to garage floor)

My driveway slopes up away from garage. My old F250 4x4 I could pull into the garage, but it wouldn't fit backed in.

In this case the driveway slopes away, its not a huge issue. I have taken that into consideration as well.

 

[Dav6662]

He is needing before and after increase inches added to lift and I apologize I do not have that....

 

[Blucid]

Right now stock height with the 33's is about...

Stock Height @ Roof Line // 73 in
Stock Height @ RTT Roof Line // Roughly Under 78 in

Garage is 82 in, so after the lift and tires it needs to be slightly under 82 in. I have about 4 inches to play with. The original plan was 2'in Lift with 35's, but im actually thinking I can do 37's

Sponsored