Sponsored

Mods Needed to run 37's on mopar lift

First Name
Alex
Joined
May 30, 2020
Threads
0
Messages
3
Reaction score
3
Location
Las Vegas, Nevada
Vehicle(s)
Jeep Gladiator
Vehicle Showcase
1
I had the lift installed about month ago and so far I've enjoyed it. The 2.5 inch RE shocks are performing well and I'm told they are better than the 2.0 Fox Shocks, especially for a truck that is setup to tow. Strangely, I've had a few things start to loosen (rear sway bar, front shock bushing) even after the 1k mile re-torque but I think that is just going to happen as much as I take it out and do 50+ miles of washboard road.

I did add the Fox ATS steering stabilizer in the front and that has helped a ton with bump steer and just general highway comfort.

If I did it all over again, I may have considered going with a slightly higher lift to stuff 40's under it but I'll save that for when the warranty expires!
Sponsored

 

Crazyvegas

New Member
First Name
BJ
Joined
Jun 16, 2020
Threads
1
Messages
3
Reaction score
3
Location
Las Vegas
Vehicle(s)
Jeep Gladiator
Vehicle Showcase
1
Did you end up having the RE lift installed if so how do you like it? I have mine in the cart finger on the trigger! But I’m just not sure :whew: I’m thinking 3-3.5 with fox shocks, and added the front adjustable LCA. Trying to stay on budget but not sure if I want to add rear adjustable track bar or if the bracket is enough also keep eyeballing the adjustable rear UCA so many decisions and not enough money:headbang:
Sorry for the late reply, havent had a chance to log on. But i did have the RE lift installed. i love it so far but definitely want to upgrade my shocks, CA etc. they did throw on some free pro comp shocks but definitely no fox or falcons. For the price and the look not bad to get me going and like you my pockets arent deep so slowly but surely.
 

Russler

Well-Known Member
First Name
Rusty
Joined
Oct 14, 2019
Threads
13
Messages
355
Reaction score
529
Location
Heath TX
Vehicle(s)
Previous 50 Willys, 76 CJ
Build Thread
Link
Zero issue rubbing under any circumstances with Nitto Ridge Grappler 37/11:50/18's, Fuel 9" wheels with -1 offset. That said I am running 29psi rear and 29.5psi front after chalk test so real tire height is 36".

I will be adding 4:88's as the 4:10's and manual transmission leave a lot to be desired.
 

Camel429

Member
First Name
Chris
Joined
Nov 13, 2019
Threads
1
Messages
7
Reaction score
26
Location
Kentucky
Vehicle(s)
Gladiator
Just put some 37 in Cooper stt pro on the factory wheels. Absolutely no rubbing, got a teraflex 1.5 on the front daystar 3/4 on the back. Running 1.75 teraflex spacers. Truck drives great cant really tell the difference from factory road noise is almost the same. Power cant really tell that much of a difference but its a jeep its made to get you there and back through any condition. Running 33 psi cold and the tires seem to ride and drive the best. Biggest thing ive noticed is the mileage.

0BB68CF3-0973-4ABA-9BF2-4C7680249A41.jpeg


C1208932-7DCF-4872-9CB5-D5ACA93ED7A9.jpeg


885E67D6-B172-47D9-A291-E70AC9517854.jpeg
 

Tall Mike

Well-Known Member
First Name
Michael
Joined
Jun 18, 2020
Threads
4
Messages
102
Reaction score
102
Location
Upstate, New York
Vehicle(s)
2021 Gladiator Rubicon
Occupation
Super Trucker...
Just put some 37 in Cooper stt pro on the factory wheels. Absolutely no rubbing, got a teraflex 1.5 on the front daystar 3/4 on the back. Running 1.75 teraflex spacers. Truck drives great cant really tell the difference from factory road noise is almost the same. Power cant really tell that much of a difference but its a jeep its made to get you there and back through any condition. Running 33 psi cold and the tires seem to ride and drive the best. Biggest thing ive noticed is the mileage.

Jeep Gladiator Mods Needed to run 37's on mopar lift 885E67D6-B172-47D9-A291-E70AC9517854


Jeep Gladiator Mods Needed to run 37's on mopar lift 885E67D6-B172-47D9-A291-E70AC9517854


Jeep Gladiator Mods Needed to run 37's on mopar lift 885E67D6-B172-47D9-A291-E70AC9517854
That really looks good.
 

Sponsored

famous

Well-Known Member
First Name
Ruben
Joined
Jun 16, 2020
Threads
4
Messages
51
Reaction score
10
Location
Hermosa Beach
Vehicle(s)
Gladiator
Occupation
Architect
For the Sport S owners out there...I just picked up my JT on Monday and added 37x12.5/R17 Toyo Open Country M/Ts on Black Rhino Arsenal wheels NO LIFT.

I just removed the plastic that connects the bumper to the fenders with a utility knife in 5 minutes.
AD64C57F-7C4E-4BF2-A932-8691FAC11FCA.jpeg
5D682C42-F5C1-4001-A0E2-8A0782344116.jpeg
Been looking for this scenario @TheRoamingGladiators - what have you learned from this so far? I ordered the 80th edition diesel, which should just be the sport s. Am going to put on 37x13.50x22s. What should I be looking out for -- potential problems (bumper, inner guards, etc...) wise?
 

famous

Well-Known Member
First Name
Ruben
Joined
Jun 16, 2020
Threads
4
Messages
51
Reaction score
10
Location
Hermosa Beach
Vehicle(s)
Gladiator
Occupation
Architect
Been looking for this scenario @TheRoamingGladiators - what have you learned from this so far? I ordered the 80th edition diesel, which should just be the sport s. Am going to put on 37x13.50x22s. What should I be looking out for -- potential problems (bumper, inner guards, etc...) wise?
I have the 80th Diesel with 37s - I ripped out inner wheel well liners & it was fine to drive - except the front bumper grinds on the tires :( -- its really annoying. I grinded down the cheap front bumper plastic & it still hits a bit of metal that is under the plastic. I finally broke down & got a stubby bumper. But I am also getting the mopar lift too. Should be a bit better with the two upgrades.
 

Tommyd

Well-Known Member
First Name
Tommy
Joined
Dec 30, 2021
Threads
28
Messages
600
Reaction score
519
Location
Georgia
Vehicle(s)
2020 jeep gladiator sport
Occupation
Grounds manager
This one looks absolutely perfect, other than the color and noisy a$$ tires, in my opinion

Jeep Gladiator Mods Needed to run 37's on mopar lift 885E67D6-B172-47D9-A291-E70AC9517854


Jeep Gladiator Mods Needed to run 37's on mopar lift 885E67D6-B172-47D9-A291-E70AC9517854
I love the billet silver especially with a machined wheel đź‘Ś
Sponsored

 
 



Top