JLM007
Active Member
- Thread starter
- #1
I'm preparing to install a pair of OEM LED headlamps on my 2020 Sport S. I read multiple threads but just want to confirm I have my parts list correct for the swap. I understand the 2020 has 3 pins on both sides so I will need the wiring harness 68414409AB. To confirm - I'll need (2) of these - one for each light, correct? Dumb question, I know - but doesn't appear they pigtail to one another so want to be sure.
Also, looking at the parts diagram and photo of the part on this thread it appears the wiring on the harness is only 1' long. Is there another wire (maybe 68347117AB or 68350767AE) required to reach the BCM to make the connection?
And lastly, from what I've read, one has the option to connect directly to the fuse (heated seat or cigarette lighter) instead of wiring to the BCM. If this is correct, would only the wiring harness 68414409AB (two of them, I'm assuming) and a fuse tap such as this be needed?
Thanks in advance for the guidance - I got to the point in my forum research where I read too many threads and need a hard reboot!
Also, looking at the parts diagram and photo of the part on this thread it appears the wiring on the harness is only 1' long. Is there another wire (maybe 68347117AB or 68350767AE) required to reach the BCM to make the connection?
And lastly, from what I've read, one has the option to connect directly to the fuse (heated seat or cigarette lighter) instead of wiring to the BCM. If this is correct, would only the wiring harness 68414409AB (two of them, I'm assuming) and a fuse tap such as this be needed?
Thanks in advance for the guidance - I got to the point in my forum research where I read too many threads and need a hard reboot!
Sponsored