Passive Entry issue

[fishburger]

So I have passive entry on my gladiator, but the driver side works every now and then. I’ve checked the plugs, no bent pins I can see, when I disable, then enable it in the settings it works great for about three times. I’ll set it, close the door, lock with key fob and unlock with passive entry, never opening the door. This works about three times before not working anymore. The passenger side works every time. Any ideas?

Sponsored

 

[Hootbro]

Does it do the same thing with both FOB's?

The Radio Frequency hub (RFH) is the gate keeper for passive entry. I would check to make sure all the connectors on it are fully seated and if necessary, disconnect fully inspect pins and fully reseat the connectors on it. RFH is located on the inside lower back cab wall behind the drivers side passenger seat. Probably have to remove some plastic cover trim for access.

 

[fishburger]

Only one FOB. I haven’t checked that, I’ll look and see, Thanks

 

[Ankh]

Only one FOB. I haven’t checked that, I’ll look and see, Thanks

Just got mine fixed this morning. Here's the work order.

Sponsored