Rancho 1.5" LEVEL IT system for the JT

[mgw750]

So for the rear, did you just add shocks? I am going to install the front Level it kit with a 1/2' spacer as well and want to bring my rear up as well. Thought about the Icon 1 3/8" in spacer, but if I can leave my stock Sport S rear springs and just add new shocks, I would rather do that.

See previous post. I also replaced the rancho 5000x shocks with bilstein 5100. It rides and handles great.

Sponsored

 

[Zsis]

See previous post. I also replaced the rancho 5000x shocks with bilstein 5100. It rides and handles great.

I understand you changed the shocks in the rear. What about the springs? Is all else in the rear stock with the exception of the shocks? No other changes back there except the added Bilsteins?

Thanks

 

[Zsis]

See previous post. I also replaced the rancho 5000x shocks with bilstein 5100. It rides and handles great.

Sorry. I am a dumbass. Just realized you said you added the 3/4 spacer in the rear. But still have stock springs correct? Did you just add stock length shocks or extended?

 

[mgw750]

Sorry. I am a dumbass. Just realized you said you added the 3/4 spacer in the rear. But still have stock springs correct? Did you just add stock length shocks or extended?

Yes, stock rear springs with 3/4 inch spacer and stock length shocks and fronts are 2-3 inch over.

 

[Zsis]

Yes, stock rear springs and rear shocks are stock length and fronts are 2-3 inch over.

Thanks again!

Sponsored