No it’s not but it’s pretty stable. I took a old shelving rack and widen it from 18” to 24” cutting welding two shelves together. Then built the base and put pluming insulation and carpet on all surfaces that would touch the doors. Cut the 4 post down to just above the doors and insulated. It fits right on top and I can roll it right back in the garage.
On things like this, I like to steal with pride
This is a picture that shows the post before I cut them. It’s just a cheap shelving unit I had in the garage. And no plane I just started building one day and this happened. At first the shelving was 18” wide but not stable so I cut and welded to 24” instead which worked great. Drilled holes through the bottom and put through the plywood.On things like this, I like to steal with pride
What are the posts made out of? Do you have any plans you could easily share?
It definitely helps I can wheel it right to the Jeep and load up.
