Tail light options for replacement of OEM LED with Blind Spot Monitoring System?

[SFBayArea]

Hey guys, yesterday, I got stuck with towing trailer behind me, maneuvering between the trees, backed up into a tree and completely took out the passenger side tail light. It was hanging out of the body and fully cracked.
What are my options for replacement? It is the OEM LED tail light with the Blind Spot Monitoring System. The dam thing is over $800 OUCH!

Thank you.

Sponsored

 

[ATL_Rubi]

I believe Oracle has the ability to incorporate the BSM

 

[SFBayArea]

Yes, I found it too. Has anyone here installed Oracle with OEM BSM on their Gladiator? Is there a DIY write up on it or youtube video?

Though still over $400 for a stupid mistake and hard to justify one light replacement over $400, but at least this option is half the Mopar solution.

 

[ORACLElights]

Hey! Suggesting the ORACLE Lighting Flush Mount Tails- wont break again

You can order here with code FORUM10 and receive additional 10% off!

Our video on the site does explain moving over the BSM as well.

Please let us know if you have any other questions!

 

[sharpsicle]

Yes, I found it too. Has anyone here installed Oracle with OEM BSM on their Gladiator? Is there a DIY write up on it or youtube video?

Though still over $400 for a stupid mistake and hard to justify one light replacement over $400, but at least this option is half the Mopar solution.

I have the Oracle lights with the sensors in them. There's really not much to it, just swap out the sensor to the new lights and then plug it all in. Oracle does have a video showing the process.




I've had good luck with the lights. I got the first release of them and I did need to get one replaced but it was a smooth process to do so. Newer run models are better and most of the negative reviews you see out there are from the original production runs of them. They've since taken steps to fix those issues.

There are also other options out there, but for me these are a winner due to their form factor, BSM capability, and US-based support. Hard to find that with anything else.

 

[SFBayArea]

Thank you guys. Seems that Oracle is the way to go.

 

[Curt Oz]

Replace yours with the Oracle's.
Everything transfers easily.
Had mine since August 2021, and glad I bought them.

 

[Lost1wing]

I like mine as well as the reverse lights in the bumper.

 

[SFBayArea]

Just ordered Oracle tail lights. Thank you guys.

 

[DanRue]

I am purchasing a 2021 Nacho Gladiator Rubicon tomorrow that is pretty much great condition with the exception of the left led taillight which has the BMS on it. The Jeep dealership that is selling it to me won’t replace it because of the slightly broken lens, because they said they already lowered the price for me and are getting me a second key fob as well. I looked into replacing it but they are quite expensive for just the left side. I was wondering if anyone that has personal experience could share it with me, regarding the BSM system and how well it works with these Oracle taillights. I do like the flush look over the originals. Thanks.

 

[AmosMoses]

I am purchasing a 2021 Nacho Gladiator Rubicon tomorrow that is pretty much great condition with the exception of the left led taillight which has the BMS on it. The Jeep dealership that is selling it to me won’t replace it because of the slightly broken lens, because they said they already lowered the price for me and are getting me a second key fob as well. I looked into replacing it but they are quite expensive for just the left side. I was wondering if anyone that has personal experience could share it with me, regarding the BSM system and how well it works with these Oracle taillights. I do like the flush look over the originals. Thanks.

Take your business elsewhere. A second key fob is standard not a bonus, so they are insulting you.

Oracle tailights in my experience are cheaply made with a short lifespan. Mine worked great when they worked, including blind spot monitoring. Aside from the right side failing to illuminate when stepping on the brake, the other problem I had was the cheap screws that were used internally to hold the bsm module in place being made out of very weak metal that turned to rust very quickly in a span of a couple years. I sent a message to oracle about getting the lights fixed and it took a couple of weeks to get a response and by that time I had moved on from trying to fix them.

 

[ORACLElights]

Replace yours with the Oracle's.
Everything transfers easily.
Had mine since August 2021, and glad I bought them.

Looks great on there!!

 

[ORACLElights]

Take your business elsewhere. A second key fob is standard not a bonus, so they are insulting you.

Oracle tailights in my experience are cheaply made with a short lifespan. Mine worked great when they worked, including blind spot monitoring. Aside from the right side failing to illuminate when stepping on the brake, the other problem I had was the cheap screws that were used internally to hold the bsm module in place being made out of very weak metal that turned to rust very quickly in a span of a couple years. I sent a message to oracle about getting the lights fixed and it took a couple of weeks to get a response and by that time I had moved on from trying to fix them.

I'm sorry you had that experience. We try to get to those responses immediately. Your trust and business is important to us. Hope to get another chance with you in the future.

 

[ORACLElights]

I am purchasing a 2021 Nacho Gladiator Rubicon tomorrow that is pretty much great condition with the exception of the left led taillight which has the BMS on it. The Jeep dealership that is selling it to me won’t replace it because of the slightly broken lens, because they said they already lowered the price for me and are getting me a second key fob as well. I looked into replacing it but they are quite expensive for just the left side. I was wondering if anyone that has personal experience could share it with me, regarding the BSM system and how well it works with these Oracle taillights. I do like the flush look over the originals. Thanks.

You can replace your tail lights with the ORACLE Lighting Flush Mount Tail Light and retain the function of the BSM. Just remove the sensor from the OEM tail light and transfer over to new lights. On our product page under the installation tab, there is a video and instructions on how to do that.

https://www.oraclelights.com/products/flush-taillight-jt

And to help, ORACLE is happy to offer you an exclusive discount with code GLADIATOR10 to add at checkout. We look forward to assisting you with your next LED mod!

 

[Sweetums]

Take your business elsewhere. A second key fob is standard not a bonus, so they are insulting you.

This, especially with the depressed Jeep prices right now. You might even find a new Jeep for a similar price with all the incentives going on.

Sponsored