Torque specs? - sway bar links, track bar, shocks

[Mojave2021]

Just wanted to confirm the trackbar to axle torque spec is 110 for the oem bar too? About to remove it to install a steering stabilizer. Thabks

Sponsored

 

[XraytecH]

Not sure if this is what you want, but I only use it as a guide. I have the 2" mopar lift if you like to know.
Hope this will help.

Is that the JL or the JT lift kit. I think the torque specs on the Lower Control Arms are different between the two kits.

 

[LostWoods]

Not sure if this is what you want, but I only use it as a guide. I have the 2" mopar lift if you like to know.
Hope this will help.

Yeah the sheet for the lift is quite a bit higher on the rears and it was a pain in the ass hitting them when I did my MC lift.

https://www.jeepgladiatorforum.com/forum/attachments/bcfc6fe4-d51c-491d-90f6-c6906a203c3a-png.71492/

 

[mmatthie]

My FSM is 15k pages long at least. If there is a spec, be it torque, fluid, voltage, resistance, or calibration for any JT trim aside from Mojave or deisel, I have it. I may not have the parts numbers as easily available but I have a list of those also with accompanying diagrams for the Sport and Rubicon

Mind sharing torque specs for suspension?
I'm swapping Sport S shocks/springs with Rubis.
So, front and rear, shock bolts (u and l), lower sway link bolts, track bar bolts, and brake line bracket specs.

I saw your attachment above but it didn't match the one in reply #3.

Thanks

 

[XraytecH]

Mind sharing torque specs for suspension?
I'm swapping Sport S shocks/springs with Rubis.
So, front and rear, shock bolts (u and l), lower sway link bolts, track bar bolts, and brake line bracket specs.

I saw your attachment above but it didn't match the one in reply #3.

Thanks

https://www.quadratec.com/sites/default/files/installation_instructions/77072468AB.pdf

 

[bastage]

Had to search for this thread again. I used the specs a year ago when I swapped in the Rubicon Take off's to my sport. Well yesterday I just installed Falcon sp2 3.3's & was amazed at the only 56lbs of torque for the front shocks they list. Will leave it & just retorque in 500 miles but damn it feels like they should be tighter then that.

https://teraflex.com/file/attachments/5dfa7a687b560b007a00ff6e.pdf

Sponsored