Updated recommendations for LED bulbs in halogen housing

[JAPE]

Our Gladiator has factory LED's, they are great.
In an effort to upgrade the Wrangler we used LOYO for the front. Every thing was good except the fog light adjustments (I had to add mounting spacers to point the beam down).
For the Tail Light/Turn and Backup we used Diode Dynamics.
I do not like the crimping resistor, therefore, I am looking for a short jumper cable with matching connectors on each end. Then I would solder the resistors in the jumper cable.
Anyone know of such a cable?

Sponsored

 

[mstrpoz]

Switched to LEDs about 6 months ago after halogen DRL burned out. Figured I'd switch them all, was about 120 bucks iirc. Work great no issues at all. Nobody has flashed me. Brake lights I couldn't switch to LEDs because the truck computer kept saying the rear turn signals were out. So kept those original. Here's the rest of what I have now


Headlights
SEALIGHT H13 9008 Bulbs, 800% Super Bright H13 Dual Beam Light Bulbs, 9008 Light Bulbs with Cooling Fan, Easy Plug-N-Play Halogen Replacement Fog Bulbs, L2 Series, Pack of 2 https://a.co/d/h46VrBe

Fog lights
Alla Lighting 2504 PSX24W LED Fog Light Bulbs 12276, 6000K Xenon White 360° Light, 2800lm Xtreme Super Bright PG20/7 Base Fog Lamps Replacement 5730 33-SMD https://a.co/d/cU0nkNU

Front Turn signals
Alla Lighting 2800lm 7440 7443 LED Turn Signal Lights Bulbs, Amber Yellow T20 7440NA 7444NA 7442NAK WY21W 7443NA 992 Blinker Lamps Replacement Xtreme Super Bright 12V 5730 33-SMD Dual Filament https://a.co/d/0AE5m0t

DRLs
Alla Lighting 2800lm T20 7440 7443 LED Bulbs, White Reverse/Signal/Brake Tail/DRL Lights 7444 7443LL 7441 W21W 6000K Xenon Xtreme Super Bright 12V 5730 33-SMD Upgrade https://a.co/d/fJNzM5B

Reverse lights
Alla Lighting 912 921 LED Bulbs for Back-up Reverse Lights, 6000K Xenon White CAN-BUS 4014 30-SMD T10 T15 906 W16W 921K 922, 360° Light Backup, Cargo Lights Replacement, Extremely Super Bright https://a.co/d/7wG5mFo

Any chance you have a new link for the headlight Bulbs? This one doesn't work.

 

[gonemad]

Any chance you have a new ming for the headlight Bulbs? This one doesn't work.

Multiple vendors on amazon carry those lamps. Just input SEALIGHT H13 9008 Bulbs into the amazon search bar.

 

[mstrpoz]

Multiple vendors on amazon carry those lamps. Just input SEALIGHT H13 9008 Bulbs into the amazon search bar.

I guess I'm getting thrown off, they all say fog light lol

 

[gonemad]

I guess I'm getting thrown off, they all day fog light lol

Shame on me. There are all kinds of variants when I search that description if you look closely at the actual yellow diodes on the lamps.

My bad.

 

[mstrpoz]

Shame on me. There are all kinds of variants when I search that description if you look closely at the actual yellow diodes on the lamps.

My bad.

All good, these seem to match your description

SEALIGHT H13/9008 Fog Light Bulbs, 800% Super Bright, 9008 Fog Light Bulbs, IP68 Waterproof, H13 Light with Play and Plug, Pack of 2 https://a.co/d/0SS2SH7

 

[Stormtroopin]

All good, these seem to match your description

SEALIGHT H13/9008 Fog Light Bulbs, 800% Super Bright, 9008 Fog Light Bulbs, IP68 Waterproof, H13 Light with Play and Plug, Pack of 2 https://a.co/d/0SS2SH7

I’m considering putting in led bulbs into my halogen housing and came across this thread when searching for bulbs, how do you like these one you linked? I have the fogs and running/blinkers already just looking for the headlight bulbs now. I will be browsing eBay for a set of OEM led projector housings but until then I’m wanting to replace the current bulbs since I already have a dead halogen headlight.

 

[Supazuk]

Take the grill off and unbolt the headlight housing, it's pretty simple but I wouldn't bother with trying to reach from the top. Some videos will show you can change headlight bulbs from behind without removing the grill but it looks like a hassle. Pop the grill off and do it the easy way

It is way easier and faster to do it from the top:
Drivers side: Remove the back cap and swap the bulb.
Drinkers side: remove one 10mm bolt on the fender, undo the clamp on tube, and pull out air box, remove cap from back of bulb and swap bulb

Sponsored