Weight of the 2020 Jeep Gladiator Rubicon PA

[akhamilton]

I have a two post car lift in my garage and it supports up to 9,000lbs evenly distributed on the 4 arms. I also own the 2015 Jeep Renegade Trailhawk and a 2017 Jeep Wrangler Unlimited Rubicon, which seem much lighter obviously when i do oil changes or whatever work on them on the car lift. So I was curious how much does the 2020 Jeep Gladiator rubicon weigh? because i also received a class 2 truck weight sticker in the mail from PA car registration which is the 7,000lbs to 15,000lbs range a few days ago.

Sponsored

 

[Labswine]

According to Google, 4,650–5,072 lb depending on equipment.

 

[akhamilton]

Thank you very much for the info. I think it is actually 6250lbs but i could be wrong as well...if you google gross weight of 2020 jeep gladiator rubicon i think a 6,000lb ish weight comes back.

 

[Bbannongmu]

My Rubi with rock rails, winch and steel front bumper was about 5250lbs or so from the last time I was at the landfill on the weigh out with my 215lb butt in it. I remember thinking it was about the same weight as my armored up and heavy tired (295/70R18Coopef STMAXX x5) JKU. Don’t recall how much gas in the tank

 

[LostWoods]

Thank you very much for the info. I think it is actually 6250lbs but i could be wrong as well...if you google gross weight of 2020 jeep gladiator rubicon i think a 6,000lb ish weight comes back.

GVWR of the heaviest possible models (Rubicon and Max Tow) is 6,250 lbs. The combined maximum axle weights is 6,850lbs. If your lift can't lift this truck, you either have a broken lift or waaaaay too much crap in/on your truck.

Not even an F-350 dually diesel exceeds the weight of your lift and "evenly distributed" means you just need to adjust the arms to ensure the center of weight (normally around the front seat) is centered on the rack.

Sponsored