What can we do for you?

[KMelfi]

Sorry Kevin not having any luck here. These are on the inboard side only correct? If you can get me measurements I may be able to find you a mopar coated bolt that we can use.

- Benny

They are on the inner and outer on each side, 4 total. Another forum member provided this, “30mm long M10 bolt”

and one with a link to this part.

https://www.quadratec.com/products/51315_0004.htm

Sponsored

 

[whiteglad]

Here are the stock bolt, a flange head bolt M10x1.5x30 mm and a ruler.

 

[KMelfi]

Here are the stock bolt, a flange head bolt M10x1.5x30 mm and a ruler.

any chance you have two spares and would be into selling them?

 

[whiteglad]

pm sent

 

[AllMoparParts.com]

They are on the inner and outer on each side, 4 total. Another forum member provided this, “30mm long M10 bolt”

and one with a link to this part.

https://www.quadratec.com/products/51315_0004.htm

Hi Kevin,
The bolt # 6104414AA mentioned in your original thread is the same bolt used to attach the skid plate to the side of the frame rails, So if you can pull one of those out and check its fitment in the frame opening then your good to go.

- Benny

 

[kickingaz]

Benny,

I went back a few pages but didn't see what I was looking for. Are the new Bilstein reservoir shocks available for purchase separately from the Mopar lift kits? If so, can you give me part numbers and pricing for my '18 JLUR and my '21 JTRD?

Thanks, and sorry if this was asked before.

 

[AllMoparParts.com]

Hi Scott,

These will not be available until Q1 24, Pricing will be around 375.00 each. Please shoot me a message around end of Dec and I will check for the latest info.

Thanks,
- Benny

 

[aFatBird]

I'm looking for the front diff cover, gasket, and fill plug for the front axle of a 22 rubicon. I've banged up the bottom of the cover a tad more than I'm comfortable with. Thanks in advance.

 

[AllMoparParts.com]

I'm looking for the front diff cover, gasket, and fill plug for the front axle of a 22 rubicon. I've banged up the bottom of the cover a tad more than I'm comfortable with. Thanks in advance.

Hi,
Mopar offers a kit that comes with gasket and hardware here
https://parts.allmoparparts.com/oem-parts/mopar-differential-cover-kit-68464903aa
I do not believe that image is correct though.

Please let me know if you have any other questions.
Thanks,
-Benny

 

[delynn10]

Hi Benny,

We are thinking about replacing an older insane audio radio with the 8.4". Started out with the 5" in a 2020 Gladiator.

Can you source that? Couldn't find it on your site.

If available, do you still do a military discount?

Thanks!

Elizabeth

 

[AllMoparParts.com]

Hi Elizabeth,
I will need your VIN to find the best option for you. Also let me know if you added a factory GPS/SXM antenna if not youll need that + wiring. We do offer codes for forum members.

Thanks,
- Benny

 

[delynn10]

Vin: 1C6HJTAG1LL143160
I believe we will also need the antenna, wiring, and bezel. - Thanks

 

[AllMoparParts.com]

Vin: 1C6HJTAG1LL143160
I believe we will also need the antenna, wiring, and bezel. - Thanks

Thanks, Here are the parts required

https://parts.allmoparparts.com/oem-parts/mopar-multi-media-radio-68417861ao
https://parts.allmoparparts.com/oem...el-for-jeep-gladiator-and-wrangler-6ab55tx7ab
https://parts.allmoparparts.com/oem-parts/mopar-satellite-antenna-68293949aa
https://parts.allmoparparts.com/p-gps-antenna-wiring-instrument-panel-side-68325470ad
https://parts.allmoparparts.com/oem-parts/mopar-sdars-antenna-cable-68337800af

Allow 30 days for delivery due to the strike. I will send you a code you can use.
- Benny

 

[getbo]

I am looking for the Mopar OEM LED headlights and LED fog lights and their installation guide. I have a 2023 Gladiator Rubicon that came with halogen lights.

 

[JeepCode4]

Pm'ed you for my Ram HD, not the gladiator this time.

Sponsored