What can we do for you?

[Jetskier222]

You are talking only power locks, not passive entry, right?
It's possible the wires don't go to the back for the power tailgate lock.

Yes.

Sponsored

 

[Texbaz]

Have you looked at Jscan, maybe the Body Control module needs to know what you did.?

 

[Jetskier222]

I'll check that. Thanks!

 

[ShadowsPapa]

Have you looked at Jscan, maybe the Body Control module needs to know what you did.?

Bingo.

 

[Dummy SALAPA]

Hi Benny can you confirm that part number 82215652AD mopar trailer brake controller will indeed fit a 2025 gladiator rubicon? I'm getting conflicting information from other mopar sites. Thank you!

 

[Jetskier222]

Have you looked at Jscan, maybe the Body Control module needs to know what you did.?

I turned it on. It's not working yet. I'll give it a couple of start cycles to see if it starts working.

 

[AllMoparParts.com]

Hey Benny,
I’m looking for a paint pen in ‘41 color, can’t seem to find it, assuming it might not be available yet?
I’m also planning to order the dashboard rail and phone mount, any chance you know if more accessories for the dashboard rail will be released?

Hi Michael,
The paint can be ordered here but is on backorder with NO ETA at the moment
https://parts.allmoparparts.com/p-41-edition-pj5-touch-up-paint-pen-68686958aa

I do not see any other accessories released at this time from that specific mopar affiliate.

- Benny

 

[AllMoparParts.com]

Hi Benny can you confirm that part number 82215652AD mopar trailer brake controller will indeed fit a 2025 gladiator rubicon? I'm getting conflicting information from other mopar sites. Thank you!

Hi John,
Yes it does but I am also seeing 2 new affiliate options with one of them being wireless. We are obtaining info on this and should have it added to the site shortly.

Please let me know if you have any other questions in the meantime

Thank you,
- Benny

 

[Texbaz]

I turned it on. It's not working yet. I'll give it a couple of start cycles to see if it starts working.

Maybe a pin out of the connector you plugged in to the tailgate lock.

Back when Mopar offered LED headlight kit most of the production 20,21,22,Gladiators that didn't have LEDs from the factory, they had to run seperate wires to the Body Control module to get the halos to work. But the LEDs would.

If you have turned on both fields for the tailgate lock, lock and unlock,
Then maybe those wires are not thier.
You can also use jscan to reboot your ecu.
I would look at the connector for sure

 

[ShadowsPapa]

Hi Benny can you confirm that part number 82215652AD mopar trailer brake controller will indeed fit a 2025 gladiator rubicon? I'm getting conflicting information from other mopar sites. Thank you!

Maybe a pin out of the connector you plugged in to the tailgate lock.

Back when Mopar offered LED headlight kit most of the production 20,21,22,Gladiators that didn't have LEDs from the factory, they had to run seperate wires to the Body Control module to get the halos to work. But the LEDs would.

If you have turned on both fields for the tailgate lock, lock and unlock,
Then maybe those wires are not thier.
You can also use jscan to reboot your ecu.
I would look at the connector for sure

Wen I added passive entry to my 2020 Overland, it was the next day before everything worked.

There's a lot of "maybe" and "what-ifs" involved in some of the early builds - meaning maybe a wire will be there, maybe not, as some discovered adding passive entry to very early Jeeps (I think some were lacking a wire in the dash)

 

[Jetskier222]

Maybe a pin out of the connector you plugged in to the tailgate lock.

Back when Mopar offered LED headlight kit most of the production 20,21,22,Gladiators that didn't have LEDs from the factory, they had to run seperate wires to the Body Control module to get the halos to work. But the LEDs would.

If you have turned on both fields for the tailgate lock, lock and unlock,
Then maybe those wires are not thier.
You can also use jscan to reboot your ecu.
I would look at the connector for sure

Any idea which pin it is?

 

[Jetskier222]

Wen I added passive entry to my 2020 Overland, it was the next day before everything worked.

There's a lot of "maybe" and "what-ifs" involved in some of the early builds - meaning maybe a wire will be there, maybe not, as some discovered adding passive entry to very early Jeeps (I think some were lacking a wire in the dash)

Any idea which pin it is?

 

[Hootbro]

Any idea which pin it is?

Should be pins 1 and 6 on the XY511A connector that hooks up the tailgate to the body.

 

[Jetskier222]

Should be pins 1 and 6 on the XY511A connector that hooks up the tailgate to the body.

Thanks!

 

[D_JT]

Hey Benny! Is there away to buy a TPMS sensor without the valve stem? JUST the sensor? I picked up some OEM take off wheels that have the original valve stem but they removed the sensor for their new wheels. I've looked and cant seem to find anything. Thanks!

Sponsored