What can we do for you?

[AllMoparParts.com]

Benny, I’m seeing conflicting information about the Mopar lift for a 2025 Jeep Gladiator Rubicon x. What fits also price. How bad is shipping to Florida
Thanks Todd

Hi Todd,
It fits. These need to ship truck freight at $450.00.
allmoparparts.com/sku/77072468ab-fs.html

I will send a code you can use,
- Benny

Sponsored

 

[kb5zcr]

Benny, I'm looking for a block heater and cord for my 23 diesel gladiator rubicon.
I'm finding part #68523853AA as the right number. Can you tell me if this is right and perhaps a savings code?

Thanks, Tim (in Texas)

 

[AllMoparParts.com]

Benny, I'm looking for a block heater and cord for my 23 diesel gladiator rubicon.
I'm finding part #68523853AA as the right number. Can you tell me if this is right and perhaps a savings code?

Thanks, Tim (in Texas)

Hi Tim,
We offer a kit here https://www.allmoparparts.com/sku/jljtengblkhtr30.html

I will send a code you can use,
- Benny

 

[kb5zcr]

Hi Tim,
We offer a kit here https://www.allmoparparts.com/sku/jljtengblkhtr30.html

I will send a code you can use,
- Benny

Thanks, when looking at that part and part number (JLJTENGBLKHTR30) it looks like its different than the one I sent in my original message (68523853AA).
Both say they fit my vehicle (23 diesel 3.0 gladiator), one looks like it snaps in (per YouTube vids), and the other (the part # you sent me) looks like it screws into the water jacket which means I would have to worry about refilling coolant and getting air out of the system.

Can you please clarify what the difference is between these two.

Thanks, Tim

 

[biodiesel]

Unlike the older style of block heater, my 2023 has a brass socket on the engine side that requires a plug heater. It was a very easy install. The plug pushes into the socket and is secured with the built-in clip.

part #68523853AA (block heater)
part #68535072AA (cord)

 

[kb5zcr]

Thank you, I will check my engine tomorrow and see if I have that same brass plug. I think it is on the passenger side of the engine. Did you go thru the wheel well or were able to get to it from above? I'm getting it for this winter.

 

[biodiesel]

Did you go thru the wheel well or were able to get to it from above? I'm getting it for this winter.

I took the photo of the plug from the wheel well, but I can't remember if I installed from the wheel well or from underneath. I just remember removing the wheel and it being fairly easy to do. The hard part was figuring out how I wanted to run the cord. Here's the final product:

 

[Shibbyjeep]

I took the photo of the plug from the wheel well, but I can't remember if I installed from the wheel well or from underneath. I just remember removing the wheel and it being fairly easy to do. The hard part was figuring out how I wanted to run the cord. Here's the final product:

Thats one way to make lemonade out of the lemon plastic front bumper!

 

[ShadowsPapa]

Hey, Benny - I know this isn't 3.6 or Gladiator related, but I am in need of the following parts for a 1994 Jeep ZJ 4.0 engine:

Plug wires,
spark plugs,
injectors.

I know I can go to a parts store to get the spark plugs, but their wires are cheap universal fit and I want the proper correct fit (looks better for show and the factory wires are a perfect fit at both ends and in the holder)

I put a set of reman injectors in it a few years back but I've had my fill of reman parts and want to go NEW, OEM, correct - not "hey, these may fit"

 

[AllMoparParts.com]

Hey, Benny - I know this isn't 3.6 or Gladiator related, but I am in need of the following parts for a 1994 Jeep ZJ 4.0 engine:

Plug wires,
spark plugs,
injectors.

I know I can go to a parts store to get the spark plugs, but their wires are cheap universal fit and I want the proper correct fit (looks better for show and the factory wires are a perfect fit at both ends and in the holder)

I put a set of reman injectors in it a few years back but I've had my fill of reman parts and want to go NEW, OEM, correct - not "hey, these may fit"

Hey Bill,

Cool to hear you have one of these!

Here is what we got
https://parts.allmoparparts.com/oem-parts/mopar-cable-5017059ab
https://parts.allmoparparts.com/oem-parts/mopar-spark-plug-68304020aa

Unfortunately the Injectors have been discontinued but I will DM you info on a dealer that shows some.

- Benny

 

[ShadowsPapa]

Hey Bill,

Cool to hear you have one of these!

Here is what we got
https://parts.allmoparparts.com/oem-parts/mopar-cable-5017059ab
https://parts.allmoparparts.com/oem-parts/mopar-spark-plug-68304020aa

Unfortunately the Injectors have been discontinued but I will DM you info on a dealer that shows some.

- Benny

Thanks much!

I've had several of each Grand Cherokee since introduction. The 94 ZJ I bought from another fellow who totaled it and was parting it out as I wanted that 4.0

The body was beyond help but the engine lives on as I rebuilt it and put it in this car.......... yes, this is Jeep related LOL

It's developed a bad miss. It was smooth as glass until this past weekend. I figured the plug wires were original so have about 135,000 miles and 30 years on them, the spark plugs are 35,000 miles and 13 years old. The injectors - well, eBay purchases, supposedly "rebuilt" and we know how that can go. I think the guy did the work at his kitchen table.

I'll get things ordered ASAP - need the car for two more shows. It's too late for the 4x4 event coming up in a few days.

I bought the 4.0 Jeep decal from a guy in Kenosha

 

[ShadowsPapa]

Benny, a bit of concern on that spark plug number (see image below) - says that number doesn't fit. Jeep people are saying the copper core plugs work best on the 4.0 (ironically, they say the same about the 4.2 or 258 engine)

Are we certain about the spark plug fit? Internet shows they are for a totally different engine.

I got the last set of injectors in the country ordered - they confirmed they had the only set that could be found! That's ok, they'll last longer than I will anyway.

Note the red - this part does not fit your vehicle............

 

[AllMoparParts.com]

Benny, a bit of concern on that spark plug number (see image below) - says that number doesn't fit. Jeep people are saying the copper core plugs work best on the 4.0 (ironically, they say the same about the 4.2 or 258 engine)

Are we certain about the spark plug fit? Internet shows they are for a totally different engine.

I got the last set of injectors in the country ordered - they confirmed they had the only set that could be found! That's ok, they'll last longer than I will anyway.

Note the red - this part does not fit your vehicle............

Hi,
Yes confident on the plug. This was previously SP0RC12LYC which is a Champion RC12LYC that you can see is confirmed here as well (last plug on the page)
https://www.championautoparts.com/f...&model[value]=349&model[label]=Grand Cherokee


Please let me know if you have any other questions at this time.

Thank you,
- Benny

 

[Pickles85]

Benny not a gladiator related question but I am about to buy https://parts.allmoparparts.com/oem-parts/mopar-wheelhouse-panel-left-5066167ab I am local do I really need to pay to pick up?

 

[AllMoparParts.com]

Benny not a gladiator related question but I am about to buy https://parts.allmoparparts.com/oem-parts/mopar-wheelhouse-panel-left-5066167ab I am local do I really need to pay to pick up?

Hey Craig,
Gonna send you a code to use for that

- Benny

Sponsored