What can we do for you?

[centra28]

Hey Benny, wondering if you can check this out for me. I got rear ended in my 21 Mojave. It put a gash in my rear tow hook, and the body shop replaced it. The replacement hook is smaller and smooth (not thick and rough textured like my original). So I have 2 different orange rear tow hooks. I had my body shop rep look into it more and she said her supplier superseded the part number from 68468059AA (original) TO 68468059AB (new part). So the part I had was 68468059AA and now I have one replaced with 68468059AB, which is definitely NOT the same.

Do you have any original Mojave rear tow hooks with part number 68468059AA? if so I'll buy it right now to get them to match again.

Sponsored

 

[AllMoparParts.com]

Hey Benny, wondering if you can check this out for me. I got rear ended in my 21 Mojave. It put a gash in my rear tow hook, and the body shop replaced it. The replacement hook is smaller and smooth (not thick and rough textured like my original). So I have 2 different orange rear tow hooks. I had my body shop rep look into it more and she said her supplier superseded the part number from 68468059AA (original) TO 68468059AB (new part). So the part I had was 68468059AA and now I have one replaced with 68468059AB, which is definitely NOT the same.

Do you have any original Mojave rear tow hooks with part number 68468059AA? if so I'll buy it right now to get them to match again.

Hi Dale,
We do not but I am checking with our sister dealership.

Thanks,
- Benny

 

[AllMoparParts.com]

Hey Benny, wondering if you can check this out for me. I got rear ended in my 21 Mojave. It put a gash in my rear tow hook, and the body shop replaced it. The replacement hook is smaller and smooth (not thick and rough textured like my original). So I have 2 different orange rear tow hooks. I had my body shop rep look into it more and she said her supplier superseded the part number from 68468059AA (original) TO 68468059AB (new part). So the part I had was 68468059AA and now I have one replaced with 68468059AB, which is definitely NOT the same.

Do you have any original Mojave rear tow hooks with part number 68468059AA? if so I'll buy it right now to get them to match again.

I am sorry Dale they do not have one. Here is another dealer that is showing inventory. Please contact them directly

GANDRUD DODGE CHRYSLER JEEP GREEN BAY WI USA

Phone: (920)-469-4980 / (866)-757-8577​

Thanks,
- Benny

 

[centra28]

I am sorry Dale they do not have one. Here is another dealer that is showing inventory. Please contact them directly

GANDRUD DODGE CHRYSLER JEEP GREEN BAY WI USA

Phone: (920)-469-4980 / (866)-757-8577​

Thanks,
- Benny

Thank you Benny

 

[TheScott]

How much for the MOPAR 3 Piece Bumper shipped to 63025 for my 2021 JTR?

I actually don’t even need the wings, as I prefer it stubby. So if you could give me both prices (if available) I would greatly appreciate it.

 

[AllMoparParts.com]

How much for the MOPAR 3 Piece Bumper shipped to 63025 for my 2021 JTR?

I actually don’t even need the wings, as I prefer it stubby. So if you could give me both prices (if available) I would greatly appreciate it.

Hi,
Here are both costs

Full bumper 1037 shipped
Stubby 878 shipped

If you are interested please let us know

- Benny

 

[Glad_he_ate]

Did not read through this entire thread, however I am wondering if there is or will be a Diesel snorkel??? Would really like one as would lots of others…

 

[AllMoparParts.com]

Did not read through this entire thread, however I am wondering if there is or will be a Diesel snorkel??? Would really like one as would lots of others…

Sorry there is not one and we do not see anything in the pipeline at this time.

- Benny

 

[joeym7]

Hi Benny, I have a 2022 Gladiator Mojave on order with a local dealer...

I want to buy a locking gas cap and the locking hood lock for it.

I found them on your site, if I enter my vehicle as a 2021 it says they both fit..

But If I enter my vehicls as it truly will be - 2022 - it says it will (not) fit (or something to this effect).

I'd be surprise if there is anything different between 2021 and 2022 as far as locking gas caps and the hood lock, so is this perhapes because the site hasn't been updated for 2022 yet?

Thanks,
-Joe

 

[Dougstdig]

Hi Doug,
We can get components but there is no plug and play kit to add this feature.

-Benny

Thank you Benny. I may contact you after the holidays to see what would be involved. I’m also looking for the trailer brake controller (I have the towing package and diesel), remote start, aux switches and some other things my unit Came with.

 

[TTU03]

Benny
I have a 2021 Willys that has the plastic bumper. I’m now the proud owner of a steel bumper with the skid plate off of a 2021 Wrangler 392.

I need:

Left and right bracket that attaches to frame for skid plate install

“Rivnuts” needed for installation of the above brackets

Bolts needed to attach skid plate to the above “rivnuts”

Plastic closeout panel that sits between bumper and grill

Plastic push tabs to attach the above closeout panel

 

[AllMoparParts.com]

Hi Benny, I have a 2022 Gladiator Mojave on order with a local dealer...

I want to buy a locking gas cap and the locking hood lock for it.

I found them on your site, if I enter my vehicle as a 2021 it says they both fit..

But If I enter my vehicls as it truly will be - 2022 - it says it will (not) fit (or something to this effect).

I'd be surprise if there is anything different between 2021 and 2022 as far as locking gas caps and the hood lock, so is this perhapes because the site hasn't been updated for 2022 yet?

Thanks,
-Joe

Hi Joe,
They should work but did not receive official 2022 data yet to update them. Note on the hood lock that the mesh insert will most likely not match the existing mesh design. There is not one available specifically for the Gladiator. It will also not work on vehicles with forward facing camera.

Please let me know if you have any questions.
Thanks,
-Benny

 

[AllMoparParts.com]

Thank you Benny. I may contact you after the holidays to see what would be involved. I’m also looking for the trailer brake controller (I have the towing package and diesel), remote start, aux switches and some other things my unit Came with.

Hi Doug,
These are on backorder at this time https://www.allmoparparts.com/sku/82215652.html
I would expect them to become available some time in January based on current info we have.

Please let me know if you have any questions.
Thanks,
-Benny

 

[AllMoparParts.com]

Benny
I have a 2021 Willys that has the plastic bumper. I’m now the proud owner of a steel bumper with the skid plate off of a 2021 Wrangler 392.

I need:

Left and right bracket that attaches to frame for skid plate install

“Rivnuts” needed for installation of the above brackets

Bolts needed to attach skid plate to the above “rivnuts”

Plastic closeout panel that sits between bumper and grill

Plastic push tabs to attach the above closeout panel

Hi,
Here are links
https://parts.allmoparparts.com/oem-parts/mopar-skid-plate-bracket-left-68353837ab
https://parts.allmoparparts.com/oem-parts/mopar-skid-plate-bracket-right-68353836ab
https://parts.allmoparparts.com/oem...-6511076aa?c=bD0xJm49U2VhcmNoIFJlc3VsdHMmaz0x
https://parts.allmoparparts.com/oem-parts/mopar-closeout-panel-6bu43rxfac
https://parts.allmoparparts.com/oem-parts/mopar-mopar-push-pin-6503598

All hardware is sold individually so please order accordingly.
Please let me know if you have any questions.
Thanks,
-Benny

 

[joeym7]

Hi Joe,
They should work but did not receive official 2022 data yet to update them. Note on the hood lock that the mesh insert will most likely not match the existing mesh design. There is not one available specifically for the Gladiator. It will also not work on vehicles with forward facing camera.

Please let me know if you have any questions.
Thanks,
-Benny

Thanks Benny, this all makes sence...

Yep, I was cognizent about the camera vs hood-lock trade-off and decided that I wanted the hood lock more...

I did read on your site that the mesh screen honeycomb openings on the kit grille are "smaller" so I was a little concerned (probably being overly parinoid for my new truck) that it would change the "air flow dynamics" into the engine, but if they are smaller there should be more of them to balance it all out, I would think...Is this correct?

-Joe

Sponsored